From | Message |
ck98daksport Dodge Dakota JOIN HERE
4/14/2005 14:00:06
|
Subject: how many grease fittings? IP: Logged
Message: How many grease (zerk) fittings are there on a 98 dak sport? Last time I had the oil changed in by a shop they said 5, then I looked back at the time before that and on the work order it says 7??? So which is it, 5 or 7? I have had the ball joints replaced and pretty sure they're the greasable kind. Figure 4 there, 2 for the tie rod ends, and then where's the last one? I have the ax1500 trans, 5spd, 2wd.
|
Big Dog Dodge Dakota JOIN HERE
4/14/2005 14:29:42
| RE: how many grease fittings IP: Logged
Message: tie rod inners - 2
tie rod outers - 2
upper balljoint L/R - 2
lower balljoint L/R - 2
AND if equipped:
Idler arm @ tie rod (But not at frame?) if equiped
Pitman (may not have zerk installed) if equiped
FWD drive shaft (on 4x4 only)
u-joint (2 IF equiped with 2 ujoints)
Did I miss any? thats 12 for 4x4 and at least 9 for 2wd. They say to grease 'em every 6000 mi.
If you have r/p steering then it is only 7 if I havent missed any. Good to know! Now what is the torque on your thermostat cover??
|
93dak4x4 Dodge Dakota JOIN HERE
4/15/2005 11:43:56
| RE: how many grease fittings? IP: Logged
Message: i believe i have either 12 or 13 on my 93 4x4.
|
stevebdak Dodge Dakota JOIN HERE
4/15/2005 12:38:12
| RE: how many grease fittings? IP: Logged
Message: I have a 97 DAK 2wd and it had 2 grease fittings until I replaced the lower ball joints(with grease fittings) so now I have 4.
|
MattNC Dodge Dakota JOIN HERE
4/15/2005 14:20:28
| RE: how many grease fittings? IP: Logged
Message: I have a '98 2wd and I have only seen about 2. where are the others? Any pictures? I must have missed a bunch last time I was under there and looked around....
Matt
|
| P 1 |
|
Post a reply to this message:
Username Registration: Optional All visitors are allowed to post messages
|