| From | Message |
ieatdirt
Dodge Dakota
JOIN HERE
3/31/2005
21:10:48
|
 Subject: tbi to 670 cfm carb?
IP: Logged
Message:
how hard is it to change from tbi to a holly 670 cfm carb if at all possible?
|
93dak4x4
Dodge Dakota
JOIN HERE
3/31/2005
21:16:50
|  RE: tbi to 670 cfm carb?
IP: Logged
Message:
I dont believe you can do that easily. your overdrive is computer controlled and if you went carbed you would need to remove all of the computer components and the computer, so then you would not have overdrive or a locking torque converter. but the motor should run.
|
gen1dak
Dodge Dakota
JOIN HERE
3/31/2005
23:29:53
| RE: tbi to 670 cfm carb?
IP: Logged
Message:
The intake manifold will not accept the standard carb flange....that'll have to be changed, or a slick adapter will have to be fabbed. The overdrive and lockup converter can be controlled by a single 99-cent toggle switch. You will also need to get the pre-TBI-style ignition and bypass the ASD relay...basically splicing two wires. And, don't forget the fuel pressure regulator. Mallory has a great single inlet, dual outlet unit. I use it. Set the pressure at around 6psi, plumb the main line to the carb, and the secondary line to the fuel tank return line you already have.
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
