| From | Message |
dodgeboy
Dodge Dakota
JOIN HERE
3/18/2002
09:02:18
|
 Subject: roller rocker help
IP: Logged
Message:
Hopefully gonna be putting the finishing touches on my new "super 6" this week so I can slap her in next week. Anyone have directions on installing a set of 1.6 mopar roller rockers? Good ole mopar didnt include anything.
thanks
|
dodgeboy
Dodge Dakota
JOIN HERE
3/19/2002
00:01:20
| RE: roller rocker help
IP: Logged
Message:
hmm...anyone?
|
kota on 20s
GenIII
3/19/2002
00:35:06
| RE: roller rocker help
IP: Logged
Message:
well thoes plastic things with the holes go between the forke type thingies (guide plates), the studs get lock-tite'ed into the head, and i think you bolt the guide plates in.
i worked on 1 cylender at a time. you have to make sure the cylender you are working on is at TDC.
you finger tighten the rockers down untill it dosent move (zero lash) and then turn the hex nut 3/4 of a turn. then the little allen threaded set screw goes in the hex nut and tightend down.
i know these are not the best directions, but you can look them up on the speedtweaks web page.
if you have a little more specific question, let me know.
Eric, 98 5.2 5speed, K&N gen II, 50mm TB, 2bbl M-1, 1.7RR's, JBA ciramic headers, carsound cat, dumped gibson, and a lot more
|
justin
Dodge Dakota
JOIN HERE
3/19/2002
09:32:44
| RE: roller rocker help
IP: Logged
Message:
whats the difference detween the 1.6 and the 1.7's?
|
kota on 20s
GenIII
3/19/2002
09:42:50
| RE: roller rocker help
IP: Logged
Message:
the 1.6 is stock, just with a roller tip, and the 1.7's are a bigger rocker. they will give your cam a little more lift and duration.
if you are useing a aftermarket cam, go with a 1.6, with a stock cam, or mild cam, go with the 1.7's
Eric, 98 5.2 5speed, K&N gen II, 50mm TB, 2bbl M-1, 1.7RR's, JBA ciramic headers, carsound cat, dumped gibson, and a lot more
|
justin
Dodge Dakota
JOIN HERE
3/19/2002
10:04:08
| RE: roller rocker help
IP: Logged
Message:
theres a cam for sale for the 3.9 at www.krcperformance.com has anyone bought this cam?
|
kota on 20s
GenIII
3/19/2002
18:54:49
| RE: roller rocker help
IP: Logged
Message:
the 1.6 is the stock rocker just with a roller tip. the 1.7 is a bigger rocker, and it will give you higher lift and duration out of the cam.
if you are going with a aftermarket cam, go with the 1.6. for a stock cam or verry mild cam, go with the 1.7's
Eric, 98 5.2 5speed, K&N gen II, 50mm TB, 2bbl M-1, 1.7RR's, JBA ciramic headers, carsound cat, dumped gibson, and a lot more
|
kota on 20s
GenIII
3/19/2002
19:29:44
| RE: roller rocker help
IP: Logged
Message:
disregard that last post. sorry
Eric, 98 5.2 5speed, K&N gen II, 50mm TB, 2bbl M-1, 1.7RR's, JBA ciramic headers, carsound cat, dumped gibson, and a lot more
|
justin
Dodge Dakota
JOIN HERE
3/21/2002
09:13:44
| RE: roller rocker help
IP: Logged
Message:
so i guess nobody is runnin 1.6's with a new cam?
|
dodgeboy
Dodge Dakota
JOIN HERE
3/21/2002
11:10:07
| RE: roller rocker help
IP: Logged
Message:
Thanks for the info guys
I am running 1.6's with the 112cl cam from krc. Its gonna be hard to tell exactly how that comdo works due to alot of other mods being done to the motor at the same time...but once i get her installed i'll let ya know
|
justin
Dodge Dakota
JOIN HERE
3/21/2002
11:40:36
| RE: roller rocker help
IP: Logged
Message:
what year is your truck and what mods do you have now?
|
Pool Shark
Dodge Dakota
JOIN HERE
2/22/2003
17:10:14
| RE: roller rocker help
IP: Logged
Message:
I can't believe Mopar Performance Roller Rockers would not come with directions. I'm putting my RRs on my engine that I'm building today. What a joke, I didn't realize they weren't in there until now. All they put in there is a 1/4 sheet of paper that says make sure you clean the adjuster nut and set screw and make sure threads are good. I'm doing it at work and I had to come home to look it up on the internet. This post was the first thing I found with info on how to do it and I just read the SpeedTweeks.Net info as well.
I'll probably post some pics of everything later today/tonight.
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
