Dodge Dakota ForumDodge Dakota PhotosDodgeDakota.net Membership
  Forums   Forum Tools
23:11:48 - 12/19/2024

V6 Dakotas
FromMessage
kirk
Dodge Dakota
JOIN HERE
 Email

3/19/2005
15:29:00

Subject: v8 to v6 tb
IP: Logged

Message:
i read the v8 tb will fit the 3.9 will i need to enlarge the intake manifold and is it easier to buy v8 throttle cable than modify v6

thanks
kirk



actually
Dodge Dakota
JOIN HERE


3/19/2005
19:11:42

RE: v8 to v6 tb
IP: Logged

Message:
it is not quite a direct bolt on, you have to slightly enlarge the air intake hole in the manifold to allow the butterflies to open more then just a little bit. no need to buy a new cable IF the TB is from a donor truck just make sure you get the clip that the V8 TB uses to connect the cable to and it will work.



Brandon N
Dodge Dakota
JOIN HERE
 Email

3/19/2005
20:03:52

RE: v8 to v6 tb
IP: Logged

Message:
How would you open up the intake manifold? Could anyone do this without any know how?



J and J Auto
GenII
 Email User Profile


3/19/2005
23:38:28

RE: v8 to v6 tb
IP: Logged

Message:
There are very few trucks that the throttle plates
hit if it does just go get 2 new V8 TB gaskets
and bolt it on

Its a no no to be grinding or removing any
material from the intake while its bolted to the
motor getting crap into the intake

Larry
J&J Auto

Brandon N
Dodge Dakota
JOIN HERE
 Email

3/20/2005
00:07:01

RE: v8 to v6 tb
IP: Logged

Message:
Thank you larry for your help have a good one.



N56629
Dodge Dakota
JOIN HERE


3/20/2005
00:33:04

RE: v8 to v6 tb
IP: Logged

Message:
If the throttle bores on a V8 TB are larger than the manifold, what do you suppose the net result will be?



IntenseDak39
*GenIII*
 User Profile


3/20/2005
08:50:32

RE: v8 to v6 tb
IP: Logged

Message:
a nice torque step ;-)






N56629
Dodge Dakota
JOIN HERE


3/21/2005
06:55:34

RE: v8 to v6 tb
IP: Logged

Message:
Hmmm, dual torque steps?

Probably not. The sharp step would cause turbulance and distrupt the smooth flow created by the TB. This also a problem with poorly aligned gaskets. People go to all the trouble to port an polish their TBs and then you look down the bore and see the gasket sticking out.



   P 1


Post a reply to this message:

Username Registration: Optional
All visitors are allowed to post messages


Name:
Email:
Notify me when I get a reply to my message:Yes  No

Icons:            

          

Subject:
Message:
 



Home | Forums | Members | Pictures | Contact Us

This site is in no way affiliated with Chrysler or any of its subsidiaries.