| From | Message |
Nick
Dodge Dakota
JOIN HERE
2/10/2005
18:36:16
|
 Subject: TPS upgrade
IP: Logged
Message:
Hey guys.
In this link, http://www.speedtweaks.ca/tipsandtricks.php#TPS_Mod
It tells you how to upgrade the TPS. It says to test it using the center terminal and a voltmeter.
It doesnt say however, wether to use the positive or negative side, and what to attach the other probe to. Has anyone done this before?
|
Just Looking
Dodge Dakota
JOIN HERE
2/10/2005
18:55:36
| RE: TPS upgrade
IP: Logged
Message:
Just put one end to negative and one to the center wire.
Most of the time u can thin up the screws a little to get ur adjustment that would lower ur risk of possible sensor damage.
|
Nick
Dodge Dakota
JOIN HERE
2/10/2005
18:58:25
| RE: TPS upgrade
IP: Logged
Message:
When you say negative are you referring to the negative terminal of the battery? Excuse my ignorance to these things but i would rather be safe then fry the whole sensor.
|
GB2000
GenIII
2/11/2005
04:14:33
| RE: TPS upgrade
IP: Logged
Message:
Positive wire of multimeter to center wire; negative wire of multimeter to a good ground or negative terminal of battery. Make sure you measure it with the ignition on and the truck NOT running, otherwise I believe it trips your MIL light. Then you'll either have to clear the code or reset the PCM.
Josh
|
N56629
Dodge Dakota
JOIN HERE
2/11/2005
06:59:56
| RE: TPS upgrade
IP: Logged
Message:
It really doesn't matter which way you connect it if you have a digital metter. If you connect it backwards, it will just read negative volts instead of positive.
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
