Dodge Dakota ForumDodge Dakota PhotosDodgeDakota.net Membership
  Forums   Forum Tools
23:57:43 - 12/19/2024

V6 Dakotas
FromMessage
Boots
Dodge Dakota
JOIN HERE
 Email

2/02/2005
19:47:02

Subject: Drive line vibration
IP: Logged

Message:
I'm curious about my 2001 Dakota 4x4 with a 3.9 at around 50 mph I notice a slight drive line vibration when under load if I take my foot off the peddle it disapears and as soon as I load it up it is back?
The dealer tells me it is normal and nothing to worry about.
Has any one else had this and how was it cured?



spt
Dodge Dakota
JOIN HERE


2/02/2005
22:37:40

RE: Drive line vibration
IP: Logged

Message:
Had this one my 1988 Dak. Played around with different tire air pressure setting. Found as long as I had 33-35lbs pressure I have no vibration. Anything below or above it the vibration comes back.



uhuh
Dodge Dakota
JOIN HERE


2/02/2005
22:55:24

RE: Drive line vibration
IP: Logged

Message:
Just more poorly designed crap from Dodge. Get used to it. Dodge designs crap.



93dak4x4
Dodge Dakota
JOIN HERE
 Email

2/03/2005
00:02:11

RE: Drive line vibration
IP: Logged

Message:
i had a similar problem, i find that goodyear tires are piles of s hit and you should change them as soon as possible. i had less then 10k miles on mine and got some bfgoodrich all-terrains because of that problem.



Tom From PA.
Dodge Dakota
JOIN HERE
 Email

2/03/2005
21:28:56

RE: Drive line vibration
IP: Logged

Message:
Have The Tires Rebalanced If That Does Not Cure It Go To Your Local Drive Shaft Shop And Have Them Rebalance Your Drive Shaft And Check Your U Joints Lose Joints You Can Tell If They Are Bad But Tight Ones Are Harder To Trouble Shoot. Make Sure You Can Get Grease In Them. Hope This Helped



Just Looking
Dodge Dakota
JOIN HERE


2/03/2005
22:22:51

RE: Drive line vibration
IP: Logged

Message:
You can also get vibration if the drive shaft was isntalled inproperly.

If u pop under ur truck u will notice that at your rear diff u can position the drive shaft multiple ways.Try diff positions on jack stands to find the one that doesnt vibrate.(use some blue thread locker when ur done)
While its on jack stands u can tell if ur tires are badly out of round just in case thats causing it.



   P 1


Post a reply to this message:

Username Registration: Optional
All visitors are allowed to post messages


Name:
Email:
Notify me when I get a reply to my message:Yes  No

Icons:            

          

Subject:
Message:
 



Home | Forums | Members | Pictures | Contact Us

This site is in no way affiliated with Chrysler or any of its subsidiaries.