| From | Message |
04DAK
Dodge Dakota
JOIN HERE
2/02/2005
12:19:28
|
 Subject: 3.7L Perf. parts
IP: Logged
Message:
Hey everyone i have a blue 3.7L Dak CC, and i was hoping someone can tell me some good mods for that truck i know that air intake works im not sure if a 180 degree would work that well on that truck and the truck is in Puerto Rico so its always hot i was thinking a 160 degree one, well either ways can someone help me on this, oohh and if there are any available 3.7L superchargers or turbo kits
|
rhino_rkw
Dodge Dakota
JOIN HERE
2/02/2005
15:51:08
|  RE: 3.7L Perf. parts
IP: Logged
Message:
I have the same truck only mine is white. I have been looking for some time now, and have not yet seen anything for it. Airaid is supposed to modify there Ram 3.7 air intake to fit along with the TB spacer. No superchargers at this time for it even thought I would love to have one.
The jet performance module is out but until you either home brew a intake, and put an exhaust on it don't even think about chipping it. At least with a stage two chip. I see no need to use the stage one chips, had one in my S-10 and didn't see to much of a deference.
I live in Las Vegas and am running the stock therm and when it was 114 outside I was pulling a toy hauler with a sandrail to the dunes and the truck never once got hot.
|
04DAK
Dodge Dakota
JOIN HERE
2/04/2005
07:16:12
|  RE: 3.7L Perf. parts
IP: Logged
Message:
Ok thanks for the bit of info atleast i know now theres the jet chip available, ile see if i could find a cat-back or something...does the Gibson catback for the 3.9 fit here??...and for the homebrew intake no biggie there thats pretty simple to do..
|
bigd
Dodge Dakota
JOIN HERE
2/04/2005
09:01:32
| RE: 3.7L Perf. parts
IP: Logged
Message:
Gibson currently makes a cat back for our 3.7l daks. However unless you are doing it for the looks I would just put a new muffler in and use the extra money for something else.
|
jay b
Dodge Dakota
JOIN HERE
8/07/2005
15:30:38
| RE: 3.7L Perf. parts
IP: Logged
Message:
volant makes a intake that will work. i have had mine on my 3.7L for around 5 months now. go to www.streetbeatcustoms.com
|
3.7 dakota
Dodge Dakota
JOIN HERE
8/10/2005
01:17:36
| RE: 3.7L Perf. parts
IP: Logged
Message:
on the volant I couldnt find one for the 3.7L
|
jboy
Dodge Dakota
JOIN HERE
4/05/2011
15:08:00
| RE: 3.7L Perf. parts
IP: Logged
Message:
Has anyone found a 180 degree thermostat for the
3.7L?
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
