| From | Message |
SICMINDS
GenIII
3/12/2002
12:51:44
|
 Subject: Jumpy TPS, from .76 to 3.45 HELP!
IP: Logged
Message:
the deal
I did the tps mod because my tps voltage was down around 55 and set it to .76. Everything worked great for about 2 months. Now its going crazzzy.
I set it to .76 and then when i drive away it jumps to 3.45 range. Also, this happend after i cleaned my TB yesterday. I tryed to take off the throttle blades and only got 1 off cause i stripped one of the screws on the right blade.
I took it to the shop and they are claiming that i messed up my TPS.
any ideas
now you know thats..................
sic
|
bernd
*GenIII*
3/12/2002
18:50:52
| RE: Jumpy TPS, from .76 to 3.45 HELP!
IP: Logged
Message:
When you're driving, it will do that. It varies resistance which changes the voltage output:
Idle = .76v
Mid Throttle = 2.0-2.5v
3/4 Throttle = 3.0-3.5v
WOT = 4.0+v
This is the normal operation for the TPS.
1997 Dodge Dakota SLT - V6
Supercharged/Intercooled @ 10# w/Nitrous
14.55 @ 96.01mph
|
sicminds
GenIII
3/12/2002
19:05:23
| RE: Jumpy TPS, from .76 to 3.45 HELP!
IP: Logged
Message:
Thanks for the reply
It will get stuck there at around 3.45
even when i bring it back to idle. I went
ahead with the new tps and its set to .70
do you think water or somthing could of
gotten in there?
now you know thats..................
sic
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
