| From | Message |
FazDak
GenII
3/12/2002
10:35:36
|
 Subject: Part#'s for PreMag 3.9's
IP: Logged
Message:
Here are a list of Mopar part #'s for preMag 3.9's
*V6 ported head, 2.02 valves-P4452747
*Cam 450"/455" 110cntr- P4452814
*4bbl intake- P4452115
*Cam 405/405 110cntr- P4452806 <--- this ones still available thru Mopar Perf.
I have no idea if any of this is even available anymore but heres a startin point for you guys anyway.
Just tryin to help you preMag's out a little.
Scott
|
Gus
Dodge Dakota
JOIN HERE
3/12/2002
12:12:34
| RE: Part#'s for PreMag 3.9's
IP: Logged
Message:
There is another cam currently listed with dodge
P4452808 .410/.425 110 centerline
But I do have a question. What is the specs for the original cam. I have been told that it is part # 4448304. The local dodge shop could give me the number but no specs on it. I would like to see how the aftermarket cams compair to the original.
|
FazDak
GenII
3/12/2002
12:34:40
| RE: Part#'s for PreMag 3.9's
IP: Logged
Message:
Your right Gus, that was another cam for preMag 3.9's, I didnt list it and a couple of others because they were lower performance.
All part #'s I listed including the one you listed are not in the current Mopar Performance catalog, and the last one I listed is in the "discontinued" section in the back.
The only reason I listed them is because sometimes wharehouses and distributors will have disco'd parts sitting around and I have found sometimes if people walk back and look instead of believing there computers they have disco'd parts sitting around.
Sorry but I have no idea what the stock specs are, I would think VERY mild and would guess a 108 or even a 106 centerline.
Good luck, Scott
|
jagbor
Dodge Dakota
JOIN HERE
6/22/2005
15:21:53
| RE: Part#'s for PreMag 3.9's
IP: Logged
Message:
Hi Fazdak! Just wondering if you ahve a few names of parts stores/warehouses where I might be able to find the P4452747 heads for my 1990 Dak? I live in British Columbia, Canada but if I could find a good deal on these heads, I would consider shipping them to me. Mancini Racing has them on back order at $1500 US/pr but that equates to ~ $2500 Cdn. or $80/hp if 30 hp gain is possible.
Any info would be greatly appreciated-I have been talking to a few other regular forum users who have suggested porting/polishing heads + install of new cam is another option if I cannot find the above heads. I do to want to peel the tires off my truck but need help when I tow a 1500 lb trailer(my previous post is titled "magnum heads on pre-mag block on pg 43 of the V6 forum).
|
Allen
Dodge Dakota
JOIN HERE
10/12/2008
23:03:55
| RE: Part#'s for PreMag 3.9's
IP: Logged
Message:
I own a 93 ram with the 3.9 and i cannot for the life of me fine a good cam without getting one custom made. i would like to know if there are any current made cams for it and any other performance parts. i was thinking about going and custom making a twin turbo setup for it off of a few junkyard cars. how much hp do u think we are talking. factory spec 180hp, 225ft lbs.
|
dakota49
Gen I
10/22/2008
21:04:08
| RE: Part#'s for PreMag 3.9's
IP: Logged
Message:
Allen, if you add a turbo, or two, you will need to add a little more fuel as well, or it could melt the pistons.
Good Luck
Dakota49
dakota49
|
Allen
Dodge Dakota
JOIN HERE
1/15/2009
23:16:19
| RE: Part#'s for PreMag 3.9's
IP: Logged
Message:
Thanks for the advice but i just bought a 85 with a 318 in it. im using it as a parts truck seeing as it has no roof. im going to put that in my 93 with a few other parts added.
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
