| From | Message |
93clubcab4x4
Dodge Dakota
JOIN HERE
12/05/2004
21:04:33
|
 Subject: 3" exhaust
IP: Logged
Message:
92 and 93 v6 dakotas have 3" exhaust. Will a hi-flow muffler help gain hp or not? If so, what 3x3 muffler is best?
|
J and J Auto
GenII
12/06/2004
12:03:16
| RE: 3
IP: Logged
Message:
That should be 2.5
the dynomax 11748 or flowmaster 50 with a single
2.5 tail has always shown the best resaults on
dyno tests
Larry
J&J Auto
|
93clubcab4x4
Dodge Dakota
JOIN HERE
12/06/2004
14:54:04
| RE: 3
IP: Logged
Message:
The exhaust on 92 and 93 v6 dakotas is 3". The only years that differ are these two. I found a dynomax super turbo #22740 at www.rockauto.com that is a direct fit for these trucks. Thanks Larry, for responding.
|
93clubcab4x4
Dodge Dakota
JOIN HERE
12/06/2004
15:46:03
| RE: 3
IP: Logged
Message:
OOps, the Dynomax won't work. It's a 2.5x2.5. Found a Flowmaster Deltaflow 40 series #943042 that will work ($73.56 at www.autopartsauthority.com/performance). As far as I can tell Dynomax doesn't make one to fit.
|
Bob Lincoln
Dodge Dakota
JOIN HERE
12/06/2004
15:57:05
| RE: 3
IP: Logged
Message:
Stock muffler inlet and outlet on my 92 V-6 Dak is 2.5"
|
93clubcab4x4
Dodge Dakota
JOIN HERE
12/06/2004
16:14:52
| RE: 3
IP: Logged
Message:
1992 - 1993
Dodge Dakota Muffler
Manufacturer: Flowmaster Muffler $73.56
Model: Dodge Dakota
Chassis: All
Engine Type: 6 CYL
Part Information: 40 Series Delta Flow Muffler, Milder Sounding Street And Strip Muffler, Powerful and Aggressive Sound, 3" Center Inlet, 3" Offset Outlet, 4" x 9 3/4" x 19" Overall Length, Oval
|
93clubcab4x4
Dodge Dakota
JOIN HERE
12/06/2004
16:23:45
| RE: 3
IP: Logged
Message:
For those who are interested: This one works even better:
1992 - 1993
Dodge Dakota Muffler
Manufacturer: Flowmaster Muffler $101.26
Model: Dodge Dakota
Chassis: All
Engine Type: 6 CYL
Part Information: 50 Series SUV Muffler, A Larger Version Of The 50 Series Designed For Trucks And SUVs, 3" Center Inlet, 3" Offset Outlet, 4" x 9 3/4" x 23" Overall Length, Oval
Ground Only Shipping
This part has FREE SHIPPING!
Upgrade the performance of your Dodge Dakota with a new Flowmaster Muffler.
|
93dakV64x45sp
Dodge Dakota
JOIN HERE
12/06/2004
22:56:28
|  RE: 3
IP: Logged
Message:
FYI:
Flowmaster (www.Flowmastermufflers.com)
Cyl. Year Dia. 40 Ser 50 Ser4" 50 Ser5"
4 87-96 2.00" 942041 942051* xxxxx
6 87-91 2.50" 942541 942551* 52556
6 92-93 3.00" 943043 xxxxxx 53057*
8 92-93 3.00" 943043 xxxxxx 53057*
6 94-96 2.50" 942542 942552* 52557
8 94-96 2.50" 942542 942552* 52557
6 98-01 2.50" 942542 942552* 52557
8 98-01 2.50" 942542 942552* 52557
8 98-01 3.00" 943042 xxxxxx 53057*
*Flowmaster's recommended mufflers for the application.
|
Bob Lincoln
Dodge Dakota
JOIN HERE
12/07/2004
08:29:18
| RE: 3
IP: Logged
Message:
I'm not saying you can't use 3" without adapters, or that this isn't a good choice, I'm just saying the *stock* setup is 2.5" in and out.
|
93dak4x4
Dodge Dakota
JOIN HERE
12/07/2004
09:26:29
| RE: 3
IP: Logged
Message:
stock pipe on the 93 IS 3 inch. you don't believe him crawl under my truck.
|
Bob Lincoln
Dodge Dakota
JOIN HERE
12/07/2004
11:36:07
| RE: 3
IP: Logged
Message:
Well, mine's a 92, maybe it's different. The original post said 92 and 93.
|
93clubcab4x4
Dodge Dakota
JOIN HERE
12/07/2004
14:57:09
| RE: 3
IP: Logged
Message:
Bob Lincoln: If you have a 92, and your exhaust is 2.5", somebody has been messing with your truck. Why would flowmaster sell 3" exhaust systems (direct fit) for the 92 if the stock system is 2.5? Seems a little funny.
|
Gears
Dodge Dakota
JOIN HERE
12/07/2004
17:26:37
| RE: 3
IP: Logged
Message:
Well I have a Gibson 3 inch single exhaust on my '00 3.9L, and it really took alot out of my bottom end.... there's my 2 cents on the 3 inchers
|
Bob Lincoln
Dodge Dakota
JOIN HERE
12/08/2004
08:10:43
| RE: 3
IP: Logged
Message:
93clubcab4x4, what can I tell you? My brother bought the truck new, replaced the catcon at the Dodge dealer with the OEM part; I just replaced everything back from the cat with Maremont stock parts, and it called for a 2.5" in and out, and it fit. Regardless, it breathes well with a K&N drop-in filter and slightly-bored out TB (took the torque step lip off).
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
