| From | Message |
93dakV64x45sp
Dodge Dakota
JOIN HERE
11/19/2004
19:48:31
|
 Subject: exhaust flanges
IP: Logged
Message:
Is there supposed to be a gasket between the exhaust manifold and the pipes where the flanges draw them together? Or just the flare and the "donut" to seal it off? I'm leaking on both sides and am not sure why.
|
J and J Auto
GenII
11/20/2004
11:27:43
| RE: exhaust flanges
IP: Logged
Message:
A round bell on the exhaust header
A flair on the y-pipe they just go togather with
no gasket just draw them up evenly and they will
seal very well
The stock exh manifolds also have no gasker its
a mating metal surface
Larry
J&J Auto
|
93dakV64x45sp
Dodge Dakota
JOIN HERE
11/20/2004
21:02:05
| RE: exhaust flanges
IP: Logged
Message:
Thanks Larry. I was trying to mate my 93 pipes to the manifold on the 97 engine I put in. The holes in the 93 manifolds are bigger, so I had to swap the manifolds off my old engine. I like the bigger ones better anyway. Thanks again.
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
