| From | Message |
Devin K.
Dodge Dakota
JOIN HERE
11/11/2004
13:10:30
|
 Subject: Cam and Ported heads
IP: Logged
Message:
I'm considering installing an after market camshaft, maybe a KRC210 and having the heads ported, how much hp would I gain from the mods?
|
N56629
Dodge Dakota
JOIN HERE
11/11/2004
14:59:21
| RE: Cam and Ported heads
IP: Logged
Message:
Without work on the intake, exhaust and PCM, probably not as much as you think.
Btw, I didn't know KRC had a 210 for the V6.
|
Devin K.
Dodge Dakota
JOIN HERE
11/11/2004
16:25:43
| RE: Cam and Ported heads
IP: Logged
Message:
N56629,
Ok wise Guy the cam should be KRC 200 V-6B and yes I have a Cold air intake, dynomax 17748, and JBA headers. Now how ponies?
|
?????????
Dodge Dakota
JOIN HERE
11/11/2004
18:58:23
| RE: Cam and Ported heads
IP: Logged
Message:
Hey, a$$ wipe, the guy was just try to help out. No need to be getting rude. Next time you want information try being cooperative instead of an A$$
|
Devin K.
Dodge Dakota
JOIN HERE
11/11/2004
19:16:49
| RE: Cam and Ported heads
IP: Logged
Message:
I'm sorry wasn't tring to be rude. Yes he pointed out that I didn't have the right cam. My comment wasn't mean't to be Rude to N56629.
|
N56629
Dodge Dakota
JOIN HERE
11/11/2004
21:02:08
| RE: Cam and Ported heads
IP: Logged
Message:
Sorry, Devin, I wasn't trying to be a "wise guy." I don't always know what is new. I had to find out what the 6b was. Are you planing on adding a supercharger? If not, stay with the 112 degree for more torque in a NA application.
There are still too many variables. You may gain as little as 15 or as much as 45hp. You would do well to upgrade your intake system and I don't mean the "cold air." Either have your tb opened up to 48 or 49mm. You could also go with a V8 tb. I would have done this before going with the headers.
You've got the engine exhaling, now get it to inhale. I would also have the current setup dynoed and see where your power is.
|
Devin K.
Dodge Dakota
JOIN HERE
11/11/2004
22:14:12
| RE: Cam and Ported heads
IP: Logged
Message:
I failed to mention I have a v8 throttle body order from a bone yard in Iowa. It should be here in a few days.
|
N56629
Dodge Dakota
JOIN HERE
11/11/2004
22:38:56
| RE: Cam and Ported heads
IP: Logged
Message:
Depending on what you have, you may also need a throttle linkage. If you want to save yourself some more bucks, look at hughesengines.com to see what they offer in the way of regrinds for your cam.
|
JFH
GenII
11/11/2004
22:55:00
| RE: Cam and Ported heads
IP: Logged
Message:
I did this, but did not dino before and after. Very noticeable at the throttle.
http://www.cardomain.com/memberpage/546400
|
stevebdak
Dodge Dakota
JOIN HERE
11/12/2004
05:37:19
| RE: Cam and Ported heads
IP: Logged
Message:
Devin K. If you are going to spend the money on the heads and cam, then you may wnat to finish up with having your intake manifold modified. Made a big diffference on my V6.
|
Devin K.
Dodge Dakota
JOIN HERE
11/12/2004
11:11:42
| RE: Cam and Ported heads
IP: Logged
Message:
Thanks for the information, I will check out KRC and make sure that I get the right calbe for the v8 Tb when it gets here.
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
