| From | Message |
Moe
Dodge Dakota
JOIN HERE
11/09/2004
14:18:39
|
 Subject: Code P1762
IP: Logged
Message:
Can anyone tell me what this code is and help how to fix it.
Thanks,
Moe
|
?
Dodge Dakota
JOIN HERE
11/10/2004
10:34:15
|  RE: Code P1762
IP: Logged
Message:
must be 2004 truck ?
|
moe
Dodge Dakota
JOIN HERE
11/10/2004
15:35:30
| RE: Code P1762
IP: Logged
Message:
Truck is 2001!
|
Dan M
Dodge Dakota
JOIN HERE
11/10/2004
16:20:52
| RE: Code P1762
IP: Logged
Message:
http://www.troublecodes.net/chrysler/
you can also find some good info on http://www.obdii.com/
- Dan M
|
RVD
Dodge Dakota
JOIN HERE
11/13/2004
10:53:28
| RE: Code P1762
IP: Logged
Message:
1762 The Governor Pressure Sensor input was too high or too low for 3 consecutive park/neutral calibrations.
|
?
Dodge Dakota
JOIN HERE
11/15/2004
09:31:21
| RE: Code P1762
IP: Logged
Message:
tranny governor /sensor !!
|
?
Dodge Dakota
JOIN HERE
11/15/2004
09:31:21
| RE: Code P1762
IP: Logged
Message:
tranny governor /sensor !!
|
J and J Auto
GenII
11/15/2004
17:50:08
| RE: Code P1762
IP: Logged
Message:
Upgraded presure sensor and solonoid unit around
$200 from chrysler they had probs from around
97 on up to around 00
First thing to do is clean all the elect
connections on the trans plug drivers side on top
above pan behind shift linkage
And another plug from trans by fire wall follow
the wires back.
Try that first before spending a lot of money and
disconnect batt hold key all the way to start for
30 secs, shut key off reconect batt start and test
a lot of times its just a connection
This will remove the trouble code unless you have
a scanner to remove code
Larry
J&J Auto
|
chocopie
Dodge Dakota
JOIN HERE
12/20/2018
10:21:14
| tVZqoJtjwksTqM
IP: Logged
Message:
HH9oK2 There is obviously a lot to realize about this. I feel you made some good points in features also.
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
