| From | Message |
JAMES97V63.9
Dodge Dakota
JOIN HERE
10/19/2004
19:39:38
|
 Subject: Ignition System what to do
IP: Logged
Message:
I'm interested in putting a new ignition system in.... the whole works and i'm not to sure what to do first. And if there is a kit that i could buy for it.
|
Seth
Dodge Dakota
JOIN HERE
10/19/2004
20:55:43
| RE: Ignition System what to do
IP: Logged
Message:
Best thing i could tell you to do is put a MSD 6A (no rev-limiter) or a MSD 6AL (with rev-limiter), followed by a MSD coil, MSD makes a coil that bolts straight up to the factory location, but you will have to get an adapter harness for the coil for the wireing unless they have changed it by now. then get a set of good plug wires and plugs.
|
JAMES97V63.9
Dodge Dakota
JOIN HERE
10/20/2004
16:23:43
| RE: Ignition System what to do
IP: Logged
Message:
what else could you suggest that what would increase the power in my truck... things that you've done. Just like over all performance. I've got Gibson headers and exhaust, Valont cold air intake, Jet stage 2 chip.
|
Seth
Dodge Dakota
JOIN HERE
10/20/2004
19:45:07
| RE: Ignition System what to do
IP: Logged
Message:
You can go with a set of taller roller rockers, bigger throttle body, bigger injectors. That would be a good start.
|
JAMES97V63.9
Dodge Dakota
JOIN HERE
10/20/2004
19:55:00
| RE: Ignition System what to do
IP: Logged
Message:
do you know Where would i beable to get information on things like that to find out what part i need
|
Seth
Dodge Dakota
JOIN HERE
10/20/2004
21:25:08
| RE: Ignition System what to do
IP: Logged
Message:
Yea, truck performance has the rollers, or just go to Crower.com they sell a set for these engines. The injectors, if yours is a 97 you can use injectors out of a 5.0 mustang, they came stock with 19lbs injectors while the 3.9s and 318s like the ones in our truck came with 16lbs. i think the website is fiveomotorsport.com, that site may not be spelled right. just do a seach. Throttle bodys you can look at krcperformance.com, or hughes engines.com
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
