| From | Message |
jspencer
Dodge Dakota
JOIN HERE
9/21/2004
13:31:40
|
 Subject: new guy performance
IP: Logged
Message:
I have a 99 dakota with a 3.9, 5 speed manual, 2wd. Bought it new and have 47,000 miles on it. I just bought a volant cold air intake and a flow master. Any other low priced mods that I can do. Nothing rediculous like superchargers. If you want a flow master I bought mine on e-bay new for $39.95.
|
Randy
Dodge Dakota
JOIN HERE
9/21/2004
14:05:41
|  RE: new guy performance
IP: Logged
Message:
how do you like your flowbastard? Did you get a single in dual out? Or did you just get it attached to your stock tailpipe?
Change your rear diff oil if you've got limited slip and make sure your clutch pack clips arent sitting in pieces at the bottom of the diff.
Move your IAT to your new air intake.
Get a good set of wires or cut your own out of 8mm stock.
Change plugs to autolite 3923 if you experience any spark knock
Hey, another question since I have a 3.9/5spd as well. Is your RPM slow to return to idle when you take your foot off the gas? Mine has a noticable lag from when I move the pedal to when the rpm actually changes.
|
jared
Dodge Dakota
JOIN HERE
9/21/2004
19:33:48
| RE: new guy performance
IP: Logged
Message:
Mine does the same. The flowmaster 70 is very nice.
|
Just Looking
Dodge Dakota
JOIN HERE
9/22/2004
02:22:00
| RE: new guy performance
IP: Logged
Message:
The other thing is throttle body grinding or swap in a v8 throttle body
Low priced but can be intimidating...
Intake manifold grinding 50-60 for new seals and bolts
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
