| From | Message |
Mine239
Dodge Dakota
JOIN HERE
9/16/2004
18:42:11
|
 Subject: Injector Tech
IP: Logged
Message:
Does anybody know of a thread or can explain how to adjust the injector sync on my 98 3.9L?
|
Just Looking
Dodge Dakota
JOIN HERE
9/17/2004
03:32:22
|  RE: Injector Tech
IP: Logged
Message:
Taken from a thread that Larry posted on this site...
take the cap off, now rotate the motor clockwise
only do not turn back when doing this.
Get it dead on TDC mark on vibration damper
compresion stroke rotor aimed at #1 plug wire
Push lightly counterclockwise on the rotor just
to take any play out.
Now look straight down over the top with a good
light, on the plate in the dist there is a line
that is marked cyl.
center the rotor button over this line is 0
turning the dist counrerclockwise will advance
this signale the injectors use to know when to
fire.
The very edge of the rotor button, not center
lined with the cyl line will be aprox +3 that
is where you want to be with the mods you have.
The dist bolt is 1/2 and a pain to get 2, a very
short box wrench, a dist wrench or an extension
with a flex socket needed.
Thats all there is to it
Larry
J&J Auto
Btw u can also use a crow foot socket attachments (i think thats what they are called) to get to that bolt
|
Mine239
Dodge Dakota
JOIN HERE
9/17/2004
10:27:03
| RE: Injector Tech
IP: Logged
Message:
Thanx for the reply!
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
