| From | Message |
Kyle M.
Dodge Dakota
10/19/2001
13:49:47
|
 Subject: Bernd, what 1/4 times on your V6?
IP: Logged
Message:
Hey bernd, I was just wondering what type of 1/4 mile times you were hitting with your V6. Also, what type of mods have you done to it?
I am planning on rebuilding my 1993 V-6 here soon, mainly cause it's got 170,000 miles on it and it puffs smoke when I first fire it up. I got the truck with the towing package on it, and even though it's got a lot of miles on it, it will still hit 2nd gear sratch, is this normal? I have no mods on it either except an open elemnt air filter, and I have wasted v-6 Camaros, Mustangs, and Firebirds, the new stlyes. WHat would be some good, cheap parts that could add good power to it?
|
Kyle M.
Dodge Dakota
10/19/2001
14:58:05
| RE: Bernd, what 1/4 times on your V6?
IP: Logged
Message:
I was also planning on boring the cylinders 30 over. What type of piston would you recomend for normal aspiration and what type of piston would you recomend if I were to put a supercharger on?
|
bernd
*GenIII*
10/19/2001
15:41:11
| RE: Bernd, what 1/4 times on your V6?
IP: Logged
Message:
At the initial "Test and Tune" in Houston, here's the link to my timeslips:
http://www.speedtweaks.net/images/TimeSlips.jpg
This was with the 25HP shot (now upgraded to the 35HP shot) and with some "issues" with me missing 4th gear and tire slippage out of the hole.
On the pistons, Magnum V8 (5.2L) will work just fine as they're the same thing in our V6's. .030" Forged JE or KeithBlack Silv-o-Lite's work fine. (Forged if you plan on Supercharging or Nitrous for safety...i'm doing the same thing on my winter project motor.)
While you're at it, a good set of Eagle H-Beam rods and some head and intake porting will REALLY wake up the V6. Contact Marty at KRC Performance for the .512" Lift Cam he's got for the V6's. (It's a HOT cam!!)
1997 Dodge Dakota SLT - V6
Supercharged @ 10# w/Nitrous
|
Kyle M.
Dodge Dakota
10/20/2001
02:10:52
| RE: Bernd, what 1/4 times on your V6?
IP: Logged
Message:
Will these mods act fine with my Fuel Injection system? It's the SMPI system. Or will I have to reset my computer?
|
bernd
*GenIII*
10/20/2001
02:21:19
| RE: Bernd, what 1/4 times on your V6?
IP: Logged
Message:
Some "fine tuning" is required but yes, the internal engine modifications will work just fine.
You're MPI just as the newer Magnums.
1997 Dodge Dakota SLT - V6
Supercharged @ 10# w/Nitrous
|
BlackQCSport
Dodge Dakota
JOIN HERE
1/26/2005
16:05:00
|  Just ordered an Electric Supercharger
IP: Logged
Message:
Bernd...I just ordered an Electric Supercharger that puts out a maximum of 12 Psi and I was wondering if you could tell me how and where to install a FMU fuel controller. I will need to know in about a week or less. THanks for your help
Jeff
Black 2001 Dodge Dakota Quad cab 3.9l V6 with: Airaid intake, Dual chamber Flowmaster single exit, 160 thermo, ASP underdrive pulleys, replaced clutch fan with electric, TB spacer, Amsoil synthetics all around, Hughes performance stage 2 Throttle body, Superchips programmer, fixing to be supercharged.
|
blast
Dodge Dakota
JOIN HERE
1/26/2005
16:10:45
| RE: Bernd, what 1/4 times on your V6?
IP: Logged
Message:
electric s/c - LOL
p.s. don't hold you're breath for BERND check out the post date!
|
who cares
Dodge Dakota
JOIN HERE
1/26/2005
16:22:57
| RE: Bernd, what 1/4 times on your V6?
IP: Logged
Message:
Oh right! lol I just need to install an FMU
|
sure
Dodge Dakota
JOIN HERE
1/26/2005
17:28:53
| RE: Bernd, what 1/4 times on your V6?
IP: Logged
Message:
um newer v6 camaros pull high 15's not sure your 170,000 mile truck with just an open filter is wasting them.
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
