| From | Message |
DgE_GuY
Dodge Dakota
JOIN HERE
2/24/2002
19:40:38
|
 Subject: DRL
IP: Logged
Message:
Ok i live in Canada and have DRL on my 2002 CC Dakota Sport+ 4x4. I want to disable them. I have checked the fuse panel and under the hood as well. Anyone have any ideas on how i can disable them.
|
teamfast
Dodge Dakota
JOIN HERE
2/27/2002
00:43:19
|  RE: DRL
IP: Logged
Message:
Ive been searching for a solution to this one
for a while.
Fuses arent the answer. The closest i got was
the park/fog combination to go out (no dash
lights either)
Anyways after i got my shop manual, I found
out they are controlled by the central timer
module CTM
It is in the DS kick panel, 3 computer inputs
are on it, leading me to beleive they could be
programmed out. Any thoughts?
|
dropt98dakota
Dodge Dakota
JOIN HERE
2/27/2002
11:34:32
|  RE: DRL
IP: Logged
Message:
with 97 and 98 only there is a fuse, all others you have to unplug the DRL controller, black box bolted to the innerside of the fender behind the battery, and run a jumper wire to two posts so that the high beams indicator will still work properly.
|
CW
GenIII
2/27/2002
14:35:34
|  RE: DRL
IP: Logged
Message:
If you unplug the modual you loose the high beam indicator in the dash. I will have to see wiring diagrams to tell if there is a wire that can be cut.
2001 RC 4.7 5sp 9.25" 3.92 LSD
Ported 68mm throttle body, IAT adjuster, 3" flowmaster cat back, TPS @ .76V, 4" cold air, Roadmaster active suspention, Removed Third cat. Electric fan Convertion, HO cams installed.
Working on adjustable fuel pressure with return.
|
teamfast
Dodge Dakota
JOIN HERE
2/27/2002
17:21:42
| RE: DRL
IP: Logged
Message:
Ummm okay, too bad electricity aint my strong
suit...
If only someone here was a dc tech....LOL
|
CW
GenIII
2/28/2002
09:38:27
| RE: DRL
IP: Logged
Message:
Haha funny guy. I just don't have my own book and have too look at it at work.
2001 RC 4.7 5sp 9.25" 3.92 LSD
Ported 68mm throttle body, IAT adjuster, 3" flowmaster cat back, TPS @ .76V, 4" cold air, Roadmaster active suspention, Removed Third cat. Electric fan Convertion, HO cams installed.
Working on adjustable fuel pressure with return.
|
dropt98dakota
Dodge Dakota
JOIN HERE
2/28/2002
11:26:01
| RE: DRL
IP: Logged
Message:
you can pull the plug but have to run a jumper wire to make the highbeam indicator work.
|
DgE_GuY
Dodge Dakota
JOIN HERE
3/03/2002
14:18:33
|  RE: DRL
IP: Logged
Message:
Well thanks for who all replyed.. your suggestions were good but unfortunatley they didnt work. If you can think of anything else or know of something that will work let me know.
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
