| From | Message |
ZenDak
Dodge Dakota
JOIN HERE
2/14/2002
13:22:14
|
 Subject: Moisture in clear corners...
IP: Logged
Message:
This may sound stupid,,but what's the best way to keep the clear corners from fogging up?
Only one does it,,and it drives me crazy.
Thanks
|
Nick
Dodge Dakota
JOIN HERE
2/14/2002
22:18:06
|  RE: Moisture in clear corners...
IP: Logged
Message:
Only one of mine does it too. Its my left one. I was going to take it off, and see if I need to put any silicone on it.
|
ZenDak
Dodge Dakota
JOIN HERE
2/15/2002
07:54:28
| RE: Moisture in clear corners...
IP: Logged
Message:
I'm trying to remember some science, and see if I should have the air cool, or warm inside the lense before I put it on,,so it won't condense,,,of course if I have a leak (I assume) it won't matter.
|
Trevor
Dodge Dakota
JOIN HERE
2/16/2002
00:35:02
| RE: Moisture in clear corners...
IP: Logged
Message:
Just think of a beer can. Cold on the inside condensation on the outside.
|
Lesley
GenIII
2/16/2002
09:00:38
| RE: Moisture in clear corners...
IP: Logged
Message:
One of my stock lenses used to do that, but the clears are okay so far. Is the rubber stripping in place with all the tabs inserted? I powerwash mine a lot, up here we have a LOT of salt, I'm thiking water could get in that way if the seal isn't firmly in place.
97 3.9 CC Sport. Black. Auto 3.55
Quick D Intake, JBA Stainless headers, Autolite 3923s, stainless Borla Turbo XL, V8 R/T TB,
19 lb.FMS fuel injectors. Coming 17" Boyd Coddington Smoothies
|
kevster
Dodge Dakota
JOIN HERE
2/16/2002
18:54:02
| RE: Moisture in clear corners...
IP: Logged
Message:
Drill a 1/8" hole in the far back bottom of housing, this will allow air and heat to escape,and at this location water will never get inside due to because the hole is on the far back bottom side. I used this method on my other vehicles.. and behold it works..
|
BlackDak02
*GenIII*
2/16/2002
19:40:44
|  RE: Moisture in clear corners...
IP: Logged
Message:
Lesley, your new clears are vented. Did you see those small rubber hoses on the backside when you wrestled with the L & R stickers on the socket holes?
2002 Black CC SLT 4x4
4.7L 45RFE 3.55 LSRD
|
Lesley
GenIII
2/16/2002
19:58:28
| RE: Moisture in clear corners...
IP: Logged
Message:
Ohhhhhh... is that what those were!! LOL! Thanks Blackdak02, it's good to know that!!
97 3.9 CC Sport. Black. Auto 3.55
Quick D Intake, JBA Stainless headers, Autolite 3923s, stainless Borla Turbo XL, V8 R/T TB,
19 lb.FMS fuel injectors. Coming 17" Boyd Coddington Smoothies
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
