| From | Message |
RS
Dodge Dakota
1/02/2002
18:24:41
|
 Subject: Street Scene lower bumper
IP: Logged
Message:
I got the street scence grille inserts for christmas, I only recieved the top portion for the grille. I want to order the bumper inserts also the only problem is I have the tow package and I was told it will not work. My question is has anyone tried to put one on anyway and did it work? I really don't want to put the top part on without the lower bumper inserts too
|
2THEXTRM
GenIII
1/02/2002
22:01:52
|  RE: Street Scene lower bumper
IP: Logged
Message:
I have factory tow package also, there is just less room to get your hands in there due to tranny cooler in front of radiator. They go on with some scraped knuckles and look awesome with both grille and valance done up. Go for it!
Flowmaster stainless cat back, Air Raid CAD and homemade TB connect, Splitfire Plugs, 33x11.50-16's
|
RS
Dodge Dakota
1/02/2002
22:26:31
|  RE: Street Scene lower bumper
IP: Logged
Message:
Thank's for the encouragement 2THEXTRM that's what I wanted to hear. I was probaly going to think of a way to rig it up anyway but I guess it sounds like I might just settle on cusing during installation! Thanks Buddy
|
Bloodless
Dodge Dakota
1/03/2002
20:37:36
| RE: Street Scene lower bumper
IP: Logged
Message:
I read somewhere in this forum that the front valence is real easy to remove.
|
2THEXTRM
GenIII
1/03/2002
21:48:52
| RE: Street Scene lower bumper
IP: Logged
Message:
if is 2001+, it is extremely easy to remove, only 4 bolts on top of bumper, takes about 2 minutes with disconnection of fog light harness's if you have them. 2000 and older have a total of eight bolts I believe, 4 on top and 2 on each side of frame underneath to attach brace brackets. You could save some time removing bumper for SS install if Tranny cooler is in the way.
Flowmaster stainless cat back, Air Raid CAD and homemade TB connect, Splitfire Plugs, 33x11.50-16's
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
