| From | Message |
DavesKota
Dodge Dakota
11/17/2001
23:10:03
|
 Subject: Shifter Knob 2002
IP: Logged
Message:
Does anyone know how to remove the shifter knob on a 2002 5-Speed Dak. Also what size it is.. I don't want to damage anything!
Thanks in advance
|
xplikt
Dodge Dakota
11/18/2001
12:31:12
|  RE: Shifter Knob 2002
IP: Logged
Message:
Good question, I would like to know too. That shifer is kind of pathetic..then again, it's a truck.
|
Geoff
Dodge Dakota
11/18/2001
13:32:37
| RE: Shifter Knob 2002
IP: Logged
Message:
I'm not sure about the 2002, but i just changed the knob on my 2000 the other day. I ended up slicing up the side of the knob with a razor it poppped off and there was a nut underneath viola.
I thought it would screw right off. I did hear that the very top of the knob is actaully a cap that can be pryed off. Mine did not look that way but who knows i threw the damn thing out. I am VERY happy with the B&M T-Handle i replaced it with feels kind of 60's hot-rodish
|
SilverSurfer
Dodge Dakota
11/19/2001
01:20:59
| RE: Shifter Knob 2002
IP: Logged
Message:
Yah I bought a Grant Evolution Knob, I took off the stock knob on my 02. How the f*ck do I get it to fit? Any ideas for shims or something to hold the little prick on their. It sure does fell good though...
|
Clevite 77
Dodge Dakota
11/20/2001
16:02:03
| RE: Shifter Knob 2002
IP: Logged
Message:
I test drove a 2002 Dakota 4x4 4.7L QC with the 5 spd and I have to agree the thing was sh!ty, not comfortable at all too small, just flat out chintzy I HAD an 99 s10 5 spd and that shifter was pretty nice for stock but I think that was the nicest thing about the truck hehe (good by s10 hello Dakota) sorry ordered one last week 1 week down 5 to go
|
R. Middleton
Dodge Dakota
11/22/2001
19:20:23
| RE: Shifter Knob 2002
IP: Logged
Message:
I recently bought a Hurst competition shifter and wanted to keep the factory knob (I have my reasons) but I found out that the shift patern indicator is a cap with a retaining rim around it. The knob "Ball" if you will is a soft rubbery type substance it is possible to get the cap out with out destroying the knob it just takes alot of careful prying around to finally get in under the thing.
Later, Middy
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
