Dodge Dakota ForumDodge Dakota PhotosDodgeDakota.net Membership
  Forums   Forum Tools
01:21:39 - 12/20/2024

Custom Style
FromMessage
Steve
Dodge Dakota
 Email

11/17/2001
17:31:41

Subject: Fog lights....
IP: Logged

Message:
Whats up everyone,I have and 98 SLT but it doesn't have fog lights in it, can anyone tell me where i can get fogs that will fit the two empty holes for them? thanks



HSKR
Dodge Dakota


11/17/2001
18:31:50

RE: Fog lights....
IP: Logged

Message:
Go to Ebay, and do a search for fog lights. Don't make it a Dakota specific, just fog lights. There shoudl be a few auctions that come up with 4" round fog lights made by BlazerTech. I just got finished installing these on my R/T to replace the factory ones. I paid $14+shipping. It was around $20 total. You will need to rig up a mounting system though. If you don't have the factory fog lights, this is your best bet. They come complete with wireing harness. Any questions about mounting let me know.





Bill
Dodge Dakota


11/18/2001
10:10:38

RE: Fog lights....
IP: Logged

Message:
I just got a set of those blazertech lights
too,what did you use to mount them? thanks
HSKR



HSKR
Dodge Dakota


11/18/2001
17:29:20

RE: Fog lights....
IP: Logged

Message:
Okay, you need to go buy new longer mounting bolts. At leat 4" long. Then three nuts for each bolt. 1/2" bolts(one that require 1/2" wrench) are the size you need. Now if you use just the bolt, and the rear hole for the stock fog light mount, the fog lights wil stick out from the valence kinda bug eyed. I had mine like that until I just replaced them. Didn't like them sticking out. So f you want them to sit back like the factory ones, you need to get a piece of metal or something sturdy about 3" long(will have to support weight of fog lights and you don't want it to flex). Drill two holes in it big enough for bolts to go through, one on each end about 1/4-1/2" in from end. Now you will need two more bolts, and two more nuts. These can be shorter about 2" long. Attatch the fog light brakcets to the lights, and the bracket to the piece of metal. Then using the front hole for factory fog lights, put the shorter bolt in, and tighten down. The fog lights shoudl sit back further, and also allow you to adjust them without hitting the valence.

I would try to take pics of what I did, but no room to get a decent pic of it, and I'm not goin to remove them to do it. It's a pain to get them on. Not much room for two hands up there to tighten the bolts. I guess you coudl remove the bumper to make it easier. You will need to leave the screws that hold the light to the bracket a little loose till you get them installed and adjusted.



KP97DAK
Dodge Dakota
 Email

11/18/2001
18:19:34

RE: Fog lights....
IP: Logged

Message:
Are these lights clear lenses, and are they glass? What kind of buld is in them?



reddak318
Dodge Dakota
 Email

11/18/2001
21:30:07

RE: Fog lights....
IP: Logged

Message:
does anyone run catz fog lights on their daks? Xmas is coming up and i want a good set of fog lights. I cant seem to find these blazertech fog lights. Did anyone get them anywhere else besides ebay?



HSKR
Dodge Dakota


11/19/2001
03:31:17

RE: Fog lights....
IP: Logged

Message:
If you can't find them on Ebay, you aren't looking very hard. Do a search for "fog lights" and find an auction for 4" round fog lights. Yes they are glass lenses with aluminum housing, and steel brakcets.





Scotty
Dodge Dakota
 Email

11/19/2001
07:35:22

RE: Fog lights....
IP: Logged

Message:
Steve,

get the foglights from WalMart, bro. they are cheaper and better than the factory ones. plus they are easy to install too!! just my 2 cents.

mahalo,
Scotty



BB2DAK
Dodge Dakota


11/21/2001
14:19:51

RE: Fog lights....
IP: Logged

Message:
Check this site

I installed these on my Dakota.
Pilot PILPL119X $80.00 for clear
$85.00 for blue or amber


http://www.autoaccessory.com/cgi-bin/ncommerce3/ExecMacro/AutoAccessorycom/go.d2w/report?siteID=c8wxdBrCXsE-w2lvSMqmDIEu4rxvZ6DiJA&start=2105


2001 Quad Cab SLT+ 4.7L 5-Speed 3.55 Lslip
ARE Cap, ArmaCoat Bed-liner, Pilot PILPL119X Fog Lights
Autolite 3923's, IAT Adjuster, K&N Drop-in w/modified intake
http://members.aol.com/bsbets/truck/intake4.jpg
http://www.dodgedakota.net/albums/viewer/101.htm



Dave
Dodge Dakota
JOIN HERE
 Email

3/01/2002
20:16:25

RE: Fog lights....
IP: Logged

Message:
Hi, I have been selling Blazertech lights to the Grand AM, Grand Prix, and Trans am guys for about a year now, I have both the Blazertech 2200 Fog lights, which light up a large area in front of your vehicle and have a light yellow light. and the 3200's which have a HID bright white/blue looking light and shine far in front of your vehicle
the 2200's usually sell for $62.99 and the 3200' are $59.99.

I sell the 2200's for $33 and the 3200's for $43

Shipping is $7 via priority mail, so you will have your lights in 2-3 days after I recieve your payment,

Paypal, Money orders OK

Email me at daveg84@hotmail if interested.

P.S. If anyone is interested in installing these and writing instructions with a few pics I will send you your set for free.

Thanks all,
Dave



Bryan
Dodge Dakota
JOIN HERE
 Email

3/10/2003
14:45:01

Fog lights!
IP: Logged

Message:
I have a 2002 Dakota, and the fog light holes don't come pre-cut. It looks like it is all one piece. If I saw that hole out, will it cause the paint to begin to chip? What's my best bet? I thought maybe if I did saw that hole out for them, then put some clear coat around the cut edges after I sand it smooth, it might work. What to do?!



adam
Dodge Dakota
JOIN HERE


3/11/2003
00:30:21

RE: Fog lights....
IP: Logged

Message:
hey scotty is right, the 40 dollar blue tinted hard glass fog lights from walmart are the only way to go! they look really good in my black wings west front fascia, and they come with the wiring harness and the sim. HID bulbs are build in, mounting is a snap! cya



stormin
Dodge Dakota
JOIN HERE
 Email

3/12/2003
01:12:48

RE: Fog lights....
IP: Logged

Message:
go piaa, that's what i replaced my stocks wit i am using these http://www.piaa.com/displayLamp.php3?inc=1000x.htmlh.



Dakota_John
Dodge Dakota
JOIN HERE
 Email

3/20/2003
13:14:44

RE: Fog lights....
IP: Logged

Message:
I got the set from wal-mart and went to install the wiring harness that came with it when what to my surprise!!! The factory wiring harness is there! All I did was splice the ends and hook up the wal-mart lights, and get a $5 factory switch from the salvage yard and presto chango, "factory" fog lights!



1_Bad_Dakota
Dodge Dakota
JOIN HERE
 Email

3/21/2003
00:49:54

RE: Fog lights....
IP: Logged

Message:
do the wal mart lights bolt right up where the factory ones do my factory lights are cracked and I want the blue ones I have seen then at wally world just wondering if they mount in the same location



Dakota_John
Dodge Dakota
JOIN HERE
 Email

3/21/2003
11:13:56

RE: Fog lights....
IP: Logged

Message:
It takes a little bit of work to make them bolt in, I just used a piece of 1/4 inch steel and bolted my lights to the steel, then the steel to the fram in front, with out it, the lights stuck out from the bumper and looked bad. But they look good, and don't forget the relay under the hood....



RJDive
Dodge Dakota
JOIN HERE


4/15/2003
02:58:55

RE: Fog lights....
IP: Logged

Message:
I have a '03 which didn't come with any fog lights. PIAA makes a great mounting kit (#30280) which mounts to your frame and doesn't shake as you drive. They are made to fit PIAA 510 lights, but you can use any WALMART and other light you find that only has one post. They are adjustable and let you slide the light in and out till it fits without sticking out any. And the best part is that it was only about $30, and now I could put any light I wanted...
Just an idea to check into...



Dakota_John
Dodge Dakota
JOIN HERE
 Email

4/16/2003
12:14:18

RE: Fog lights....
IP: Logged

Message:
Do you know the website that has the mounting brackets? I've been having a problem with mine vibrating loose and getting all cockeyed...I think the brackets might be an easier way to go.



jared
Dodge Dakota
JOIN HERE
 Email

4/28/2003
19:55:58

RE: Fog lights....
IP: Logged

Message:
im lookin for the 2200 ones that have a yellow light, these are for an gmc envoy and i want that yellow foglight look like the lexus is300 has..i figure if i put yellow bulbs in there that it will be even more yellow...but i cant find them in any stores around here.



RED97KOTA
Dodge Dakota
JOIN HERE


4/28/2003
22:01:59

RE: Fog lights....
IP: Logged

Message:
jared, are these the ones you are looking for?? I saw these on ebay the other day while looking for some foglights.
http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=2412215687&category=33709



jared
Dodge Dakota
JOIN HERE
 Email

4/28/2003
22:45:51

RE: Fog lights....
IP: Logged

Message:
kinda..those are made by rally, im lookin for the ones made by blazertech, mainly b.c i know they will bolt up to my existing brackets with very little modification...there was someone on this thread that said he has them for sale, but he never returned my email.



   P 1 Next Page>>


 



Home | Forums | Members | Pictures | Contact Us

This site is in no way affiliated with Chrysler or any of its subsidiaries.