Forums
Forum Tools
|
|
20:15:37 - 12/29/2024
Custom Style
From | Message |
stevebdak Dodge Dakota JOIN HERE
5/11/2006 05:06:02
|
Subject: Billet Wiper Arms IP: Logged
Message: Would like to see what you all think. I bought a set of Zoops billet wiper arms and modified them for my Dodge Dakota. Here is a link to a close up Pic.
http://dodgetruckworld.tenmagazines.com/showownerpic.asp?u=5479&n=294745&pos=13
|
The Purple1 DakotaEnthusiast
5/12/2006 21:49:10
| RE: Billet Wiper Arms IP: Logged
Message: That's really neat! Kinda like on '87-'96 Dakotas with that style arm and blade. Only in zootier billet aluminum and stainless...
How about describing how ya did it? Looks like you reused the lower part of the stock arm, but with the paint stripped. How'd you marry it all together??
"Enquiring minds want to know!"
Extreme Velocity Intake, 52 MM Holley Billet, Ported, Hughes Plenum Plate, Perma Cool Fan, Jacobs Pro Street, Moroso Ultra 40, Bosch 4, Superchips, TPS, CPS, IAT Mods, Dynomax Ultra Flo, Transgo, SLT Trim, Diamond Heads & Corners, Clear Tails, Hood Pins, APC White Gauge, PML Polished Trans & Diff Covers...
|
Notso Dodge Dakota JOIN HERE
5/16/2006 01:29:59
| RE: Billet Wiper Arms IP: Logged
Message: They don't look like billet pieces. They look stamped.
|
SteveBDAK Dodge Dakota JOIN HERE
5/16/2006 17:39:23
| RE: Billet Wiper Arms IP: Logged
Message: Not wanting to tear apart my wiper arms on my Dakota, I spent 20 bucks at the local junk yard and picked up a used set. I cut the bottom mounting part out of the used set. The new wiper arms just unscrew apart. The problem that I had was that the springs on the underside did not fit. I used my dremel to cut away on the bottom parts so that the springs could be streached and connected to the new wiper arms. The arms themselves needed to be shaped so they would apply preasure on the blades to make good contact with the window. And the length will have to be cut for each arm. Once cut I used my bench vice and a hammer to shape them. For the color of the bottom part, I used my dremel again and sanded them to bare metal and gave them a brushed look and then 5 coats of clear coat. Put them back together and did the final mounting.
|
XENO Dodge Dakota JOIN HERE
5/26/2006 23:46:47
| RE: Billet Wiper Arms IP: Logged
Message: WOW, THE CHICKS IN MY AREA DIG WIPER ARMS!!!!
I BOUGHT A SET OF DUAL WIPER BLADES FROM PEP BOYS, AND I GOT 32 PHONE NUMBERS FROM CHICKS THE LAST TIME I WENT TO A CLUB.
DRIVE IT LIKE YOU STOLE IT, THEN JUNK IT
|
| P 1 |
|
Post a reply to this message:
Username Registration: Optional All visitors are allowed to post messages
|
|