| From | Message |
jon
Dodge Dakota
10/26/2001
19:32:14
|
 Subject: clear corners
IP: Logged
Message:
I just order a set of clear corners from procarparts.com, and i was wondering if anyone has installed these and how difficult it was.
|
DavesKota
Dodge Dakota
10/27/2001
15:33:55
|  RE: clear corners
IP: Logged
Message:
Yeah I just installed mine on tuesday... piece of cake took me about 20 minutes.. Only thing that was a pain was cutting the wires for the front marker lights.. but besides that they look great. Unless yours are comming with bulbs, go to K-Mart and pick up a set they were $2 less than my local Murry's for the same bulbs. Just read the instructions in your owners manual! The clears look awsome! Good luck!
|
justin
Dodge Dakota
10/27/2001
22:49:46
| RE: clear corners
IP: Logged
Message:
they were easy as hell. it would be good to have a soldering iron handy though. the only difficult part was waiting for the package to come
|
SinCity R/T
Dodge Dakota
10/28/2001
13:12:26
| RE: clear corners
IP: Logged
Message:
If you have any questions about this install, instructions with pictures are available on my website.
SinCity R/T
2001 Silver CC R/T
http://users.lvcm.com/stcr
|
ZenDak
Dodge Dakota
10/31/2001
12:49:16
| RE: clear corners
IP: Logged
Message:
I hope you get your lenses,,,,I ordered mine yesterday,,, and they out of stock for 4-5 weeks!
|
Curt
Dodge Dakota
11/04/2001
08:57:56
| RE: clear corners
IP: Logged
Message:
Hi Yall, how much did you pay for the clear corners? I know they sell them on ebay.com all day long for $49 + SH
I assume the way yall are talking the clear corners come with a different lite bulb socket which have to be spliced?
'00 SLT CC 4.7 auto
|
Marks DQC
GenIII
11/04/2001
20:05:07
| RE: clear corners
IP: Logged
Message:
Procarparts.com sells them for $43.95 + $10.95 shipping. They sell most of the sets that are sold on eBay. Funny but they usually get more for them on eBay than they do direct sell. eBay is great sometimes but only if you do your homework.
2001 Dakota Quad Cab SLT , 4.7L, Auto, 3.55 LSD, Garnet Red over Slate, Zaino, Tint, Vent Guard, Gaylords Lid, Hotchkis Springs, Bilstein Shocks, Wet Okole Covers
|
justin
Dodge Dakota
11/05/2001
10:05:17
| RE: clear corners
IP: Logged
Message:
alright dont worry its the easiest install in the world. the only thing you'll need is a screwdriver with a little head on it that looks like this-->* and it would be good the have a soldering iron. unscrew the little screw near the middle of the lamp, PULL the light out, it might take a little tenny tiny bit of force. then cut the wire, the corners come with alot of wire to work with, the stock bulb housings come out by turning them. then put the yellow bulbs in the bulb housings(if you touch the bulbs wipe them off) and half turn them in the new corners, connect the wires solder them push them in with a little force untill they lock in, and put the screw in. the kit doesnt come with instruction cause they are that easy. dont be worried.
|
ZenDak
Dodge Dakota
11/05/2001
12:47:06
| RE: clear corners
IP: Logged
Message:
Ha! My clear corners came in! Like 5 minutes ago. Does anyone know the part number for bulbs they take? Mine only came with marker/very side bulbs. It didnt' have the lower 2 bulbs in each lense (4 all together missing).
If anyone remembers the number it would be greatly appreciated.
I'm eager to get home and pop them in,,but I have to stop off and get the colored bulbs...AAhhhh!
|
Knobbyman
GenIII
11/05/2001
14:42:22
| RE: clear corners
IP: Logged
Message:
Check your owners manuel.. I'm almost positive it's in there.
'01 Graphite QC 4x4
4.7 3.55 LSD
http://www.knobbyman.com
|
ZenDak
Dodge Dakota
11/05/2001
15:52:18
| RE: clear corners
IP: Logged
Message:
Graci knobbyman. It's a Mon. after a long-a$$ weekend. I haven't looked at the connectors in the back yet. I'm not afraid of do'n some splice'n and soldering(got my EE degree). Is there just a wiring harness for the 4 colored bulbs I'm buying or do I have to cut the existing wiring and splice in the new ones? I know the corner bulbs I'll be cutting/splicing into the stock wiring.
Why the hell did these clear corners come w/just the two colored bulbs in the corners, and not the rest of them?
Well....they look sweet,,so I cant complain too much.
|
Knobbyman
GenIII
11/06/2001
12:28:21
| RE: clear corners
IP: Logged
Message:
No idea about the splicing .. but what color is your truck? I'm really wanting to see a Graphite SLT w/ clear corners on it.. So I can see if I want to add them to my mods list.
'01 Graphite QC 4x4
4.7 3.55 LSD
http://www.knobbyman.com
|
ZenDak
Dodge Dakota
11/06/2001
17:21:40
| RE: clear corners
IP: Logged
Message:
Mine is '01 4.7 CC Sport,,,Graphite w/ black racing stripes over it. It looks sweet,,,,I haven't had a chance to get some pic.s up yet. But trust me,,,they look sweet.
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
