| From | Message |
SLTDakota
Dodge Dakota
JOIN HERE
12/23/2004
21:23:36
|
 Subject: Diamond Euro Cut Headlights HELPP!!
IP: Logged
Message:
I just bought a pair of these headlights
http://www.procarparts.com/store-detail.asp?sku=DG97DK-3396HSX&dbname=onlinestoreDB
There is 2 wires connected to a amber bulb im wondering where you connect these wires to on the old headlight wires? Any suggestions.
|
greendak
Dodge Dakota
JOIN HERE
12/23/2004
23:56:08
| RE: Diamond Euro Cut Headlights HELPP!!
IP: Logged
Message:
1st, ya gotta cut off the attachment(where the bulb sits) for the corner bulb(the smallest one in the turnsignal). 2nd, splice the wires from the harness into the wires that go to the piece that came w/ the new lights. 3rd, put some electrical tape on there and you're done.
|
platinumdak
Dodge Dakota
JOIN HERE
12/28/2004
17:59:20
| RE: Diamond Euro Cut Headlights HELPP!!
IP: Logged
Message:
ight so i got a pair of clear corners for christmas from EBAY..they fit the same as stock but they dint come wit blub sockets..so i tried puttin in the stock ones took me a lil while but i got two of them in then the lil one on the end wont go in..theres sum extra 1/4 inch plastic ring on the area to insert the socket.. any one else have this problem???
|
Rich
Dodge Dakota
JOIN HERE
12/28/2004
21:15:48
| RE: Diamond Euro Cut Headlights HELPP!!
IP: Logged
Message:
Had the exact same problem with that little one on the end. Solved it by sanding very slightly on that plastic ring with the square bump on it. Added a little super glue to get her snug witht he lense, and wa-la
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
