G. Cowardin
Dodge Dakota
10/10/2001
10:33:35
|  RE: screwed
IP: Logged
Message:
You probably didn't strip them. They are Torx screws. Get a Torx bit, I believe I saw T-15 on a guys post. If they are stripped for real and you are planning on throwing away the stock housing, you can cut a slot in the screw head with a dremel and use a flathead to turn it. Depends on how deep the screw is. It is almost impossible to strip a Torx head, they are designed to apply torque at right angles and require little or no horizontal force to turn, only radial pressure.
|
