From | Message |
RobMeredith Dodge Dakota JOIN HERE
9/01/2004 08:27:40
|
Subject: Clear Corners (not euros) IP: Logged
Message: I'm looking for some clear corners to match the headlights. I want something that will fit PERFECTLY and not require harness modifications. Any suggestions? I have an '04 QC.
Thanks!
|
RobMeredith Dodge Dakota JOIN HERE
9/01/2004 23:35:30
| RE: Clear Corners (not euros) IP: Logged
Message: Thoughts? I've not got any answers on this yet. I'm trying to avoid ordering a set only to have to return them because they were designed for 97-2k Daks w/ the old style light bulb connectors.
-rob
|
LilRed01 Dodge Dakota JOIN HERE
9/04/2004 16:32:02
| RE: Clear Corners (not euros) IP: Logged
Message: I just installed some from APC, they are DOT approved and fit exactly like factory corners. all you need is, a T-15 screw driver and 2 amber3157 bulbs. the kit came with two but you need 4. they do have one small peice of amber on them for the reflector but they look great.
|
Stampy Dodge Dakota JOIN HERE
9/04/2004 19:59:11
| RE: Clear Corners (not euros) IP: Logged
Message: or go to ebay...there are many to choose from
- Stampy
|
Robert Dodge Dakota JOIN HERE
9/07/2004 17:53:22
| RE: Clear Corners (not euros) IP: Logged
Message: www.streetbeatcustoms.com
|
mayo Dodge Dakota JOIN HERE
9/18/2004 11:14:19
| RE: Clear Corners (not euros) IP: Logged
Message: Anyone tried clear corners by In-Pro car wear? Saw them on stylinconcepts.com for 55.00.
mayo
|
mysteriusblur Dodge Dakota JOIN HERE
9/19/2004 21:04:14
| RE: Clear Corners (not euros) IP: Logged
Message: I just bought a set from Procarparts.com. They fit in perfectly, and the installation only took me around 10 minutes to put both on. They match the factory headlights great, and were priced at $26.00 (I think), or $40 something with shipping. However, I have a 2000 and am not sure if anything changed by 2004. Hope that helped. BTW, If you don't like seeing the orange through the clear corners, put a light coat of high heat engine paint (Murray's, $5) on the top half of each bulb. It looks great on my dakota, the bulbs still glow orange, but you can barely see them. Good Luck
|
marco Dodge Dakota JOIN HERE
9/19/2004 22:44:10
| RE: Clear Corners (not euros) IP: Logged
Message: i just did the exact same thing as myst in the above post. they look great and they were only 26 bucks
|
mayo Dodge Dakota JOIN HERE
9/20/2004 09:32:06
| RE: Clear Corners (not euros) IP: Logged
Message: Saw the ones on procarparts for 29.95. Does anyone know what wiring mods have to be done to these for an 04? It list a "universal harness" ??? Anyone got these on an 04 yet?
|
eddy Dodge Dakota JOIN HERE
10/07/2004 10:09:55
| RE: Clear Corners (not euros) IP: Logged
Message: Wanted them from PRocarparts.com but for some reason their site wasn't working and neither of my credit cards would go through. Went through mako-auto-parts instead. Saw a set of the APCs but was turned off by the amber reflector. Seemed to defeat the purpose of going to clears in the first place. Didn't want to order them if I didn't know for sure that I'd be able to remove the amber part easily without damaging the lights. They'll be coming from mako-auto trends instead. I know, not too well known, but they had something like 98.2% feedback and I was able to talk to someone on the phone. I asked if they required splicing, I was told n. I hope that's true and it's the fast bolt-on job most other people claim.
|
mayo Dodge Dakota JOIN HERE
10/09/2004 11:15:07
| RE: Clear Corners (not euros) IP: Logged
Message: Hey Rob, I just got mine on from procarparts.com and it was a simple mod. I used all the original bulb harnesses and snapped them in. The outside small bulb harness didn't screw in as tight as I would have liked, so I cut a hole in a piece of ductape and applied it over the edge of harness to help prevent it coming loose or retaining moisture. (if you can't fix it duct it, right). Looks sweet and pressure washer tested.
mayo.
|
| P 1 |
|
Post a reply to this message:
Username Registration: Optional All visitors are allowed to post messages
|