| From | Message |
Alan Cross
Dodge Dakota
JOIN HERE
5/18/2004
21:46:53
|
 Subject: Fog lights
IP: Logged
Message:
i have a '99 dakota and one of my fog lights is busted out. what kind of aftermarket lights will fit and are there any that work with the stock wiring?
|
.boB
Dodge Dakota
JOIN HERE
5/21/2004
10:12:39
|  RE: Fog lights
IP: Logged
Message:
Almost any 5" light can be made to fit with a little bit of work. I'v not found any quality lights that are a direct bolt in. They're probably out there, but I just havn't found them.
A few months ago I installed PIAA lights in my '01 Sport. They fit the hole in the fascia very well. But I had to fab my own brackets to get them to fit right.
Wiring is pretty simple. Pos and Neg. Solder and shrink wrap, and you're done.
|
mpil1
GenIII
5/26/2004
09:48:33
| RE: Fog lights
IP: Logged
Message:
.bob
I think you mean any 4" light.... 4" PIAA's fit very nicey into opening.
Mpil1
'02 SXT CC
|
Alan
Dodge Dakota
JOIN HERE
5/26/2004
13:22:07
| RE: Fog lights
IP: Logged
Message:
ok cool...i bought a set of Pilot 4" lights from auto zone for about $40 and have the same wattage and all that as the more expensive ones. i'm guess they will work ok. anyways is there some kind of an easy way to take out the stock lights and brackets without taking the bumper off? i looked under there and it was really hard to get a screwdriver in there but i didn't really spend alot of time on it...what did you do?
|
mpil1
GenIII
5/26/2004
20:37:38
| RE: Fog lights
IP: Logged
Message:
Mine didn't come with fog lights stock. I had to cut out the holes with a ulility knife and a dremel tool then I fabbed my own brackets. I started out with 4" Pilots. They were definately brighter than my current PIAA's. However, the Pilots cracked after just a few months...I think one took a stone on the highway. I got the PIAA's though cause they're built stronger.
Mpil1
'02 SXT CC
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
