From | Message |
GR Dodge Dakota JOIN HERE
11/27/2003 09:20:07
|
Subject: Gen III bumper on Gen II IP: Logged
Message: The bumper on my '95 Gen II rusted severely, so I bought an '02 bumper on Ebay and installed it. The '02 bumper is approx. 2" shorter but the frame brackets are the same distance apart as the '95. Only one of the three bolts lines up, and the other two must be drilled or cut with a torch. The whole job took about 2 hours and the results are imo very pleasing.
|
Jeff Janssen Dodge Dakota JOIN HERE
11/27/2003 11:18:14
| RE: Gen III bumper on Gen II IP: Logged
Message: Do you have pics that you could post or email? I have a 96 that has a banged up front bumper.
Thanks,
Jeff
|
92Dakota4x4 GenII
11/27/2003 12:39:30
| RE: Gen III bumper on Gen II IP: Logged
Message: I think he's talking about installing the REAR bumper....I did this last year..check my website.....
|
92Dakota4x4 GenII
11/27/2003 22:37:35
| RE: Gen III bumper on Gen II IP: Logged
Message: test
|
92Dakota4x4 GenII
11/27/2003 22:38:45
| RE: Gen III bumper on Gen II IP: Logged
Message: test
|
| P 1 |
|
Post a reply to this message:
Username Registration: Optional All visitors are allowed to post messages
|