| From | Message |
KryceK
Dodge Dakota
JOIN HERE
9/26/2003
20:06:26
|
 Subject: Wiper Arms
IP: Logged
Message:
I have searched past posts on here and most say once you take off the 15mm bolt that the wiper arms should come of with some pressure. Is this correct or is there something i am missing? i dont want to pull so hard that somehting bends or breaks underneath. please help. i have a 2002 dak
|
gcastro
Dodge Dakota
JOIN HERE
9/28/2003
09:38:14
|  RE: Wiper Arms
IP: Logged
Message:
you might have to apply a good amount of pressure depending on how pressed on they are. autozone sells these things called battery terminal removers. they are used to remove the battery terminals when they are to hard to remove. they look like a miniature puller tool. this will also work on pulling the wiper arm off, it cost $2 and some change. i have used it on my wiper arms and it helped out alot. i read on this site that all you have to do is pry from under the wiper arm, the problem is when you pry you have rest your pry tool against the windsheild. my buddy tryed this method and was able to remove the wiper arm but he also cracked his windsheild in the process. hope this helps
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
