Forums
Forum Tools
|
 |
01:22:27 - 12/20/2024
Custom Style
| From | Message |
Chris
Dodge Dakota
JOIN HERE
8/11/2003
21:46:42
|
 Subject: bed liners
IP: Logged
Message:
I have a 97 dak that had an over the rail bedliner when i bought it. Since then I took it out so I could put a cover on the bed. I want to put in another bed liner and was leaning toward a spray on or roll on. I'm just looking for any advice/experience because some guy tried to sell me a kit for $100 on a Herculiner that didn't really look too promising. Also any advice on touch up paint to cover the scratches left by the old liner rubbing on the rail. Thanks a lot
|
modquad
Dodge Dakota
JOIN HERE
8/11/2003
22:07:43
|  RE: bed liners
IP: Logged
Message:
i have a 2000 quad cab dakota, and i had a rino liner put in it.best thing i ever did. i also had them spray the liner in so it overlapped the edges of the box about 1",so a cover won't tear up the paint.
|
Demon
Dodge Dakota
JOIN HERE
8/12/2003
07:58:37
|  RE: bed liners
IP: Logged
Message:
Rhino liner
|
03QuadDak
Dodge Dakota
JOIN HERE
8/12/2003
12:30:10
| RE: bed liners
IP: Logged
Message:
Go Line-X or Rhino. I love my Line-X, but I've got nothing against Rhino.
Turboliner is kinda weak and plastic-like, roll-ons suck period.
|
pbxr
GenIII
8/13/2003
06:54:36
| RE: bed liners
IP: Logged
Message:
IMHO 2 coats of Roll-on and you saved a ton of bucks. Same type of product as Rhino etc.. just not sprayed on. I have had the roll-on type for quite some time, from Wal-Mart, for about 60 bucks. I have since hauled cinder blocks, paver stones, lumber, drywall, drywall jack, scaffolding etc, and it is holding up very well. Prep is the key to ANY type of sprayed or roll-on liner. THe reason why Rhino and the like are thick at first is the amount of spray going through the gun. You are paying for overspray, and the loss incurred by the installer. Roll it an forgetta bout it..
'01 Sport Auto 3.9, CC, 3923s, Intense Cold Intake, Dynomax SuperTurbo 17748, Wal-Mart special roll on bedliner, MOOG upper and lower ball joints, V8 TB, clear corners, gutt guard, tinted,blah blah...
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
|
