From | Message |
Adam Dodge Dakota JOIN HERE
5/18/2003 10:03:18
|
Subject: Racing Seats IP: Logged
Message: Anyone ever installed a set of racing seats in their Dakota? Something like the R1 seats or similar. I want to get a set but I'm wondering about the difficulty of this install. And if anyone has any pics of their install, email them to me at low97dak@hotmail.com. Thanks for any help.
Adam Gollan
|
DakotaJeff Dodge Dakota JOIN HERE
5/19/2003 17:54:09
| RE: Racing Seats IP: Logged
Message: hey adam..i got a set..ill throw a link at the bottom to my pics page...no direct shots of the seats..but u can still see them..i got a set of 3A racing sats..pretty cheap..and they came with the sliders...but we took them off and bolted them on to the factory ones using cross braces.
Jeff
http://dangerousobsession.tripod.com/jeff.htm
|
adam Dodge Dakota JOIN HERE
5/20/2003 00:35:02
| RE: Racing Seats IP: Logged
Message: how much did those put u back?
|
IntenseDak39 *GenIII*
5/20/2003 15:10:29
| RE: Racing Seats IP: Logged
Message: i have the Corbeau CR1 seats... not too hard to install. I used my factory brackets and only had to drill two holes on each one (the other two mounting holes lined up)
1998 Regular Cab V6 Auto
|
DakotaJeff Dodge Dakota JOIN HERE
5/20/2003 17:41:37
| RE: Racing Seats IP: Logged
Message: Adam.they were about 3 bills for the pair...fully recline.several different colors..and come with sliders
Jeff
|
99CCRT Dodge Dakota JOIN HERE
5/20/2003 21:34:13
| RE: Racing Seats IP: Logged
Message: Jeff, like your seats. i am looking for yellow ones right now myself. You said they cost $300. Did you have to buy anything else to make them fit? Brackets. bars, etc.? Where did you get them? How do you like them, fit? Thanks, please email me at vball005@yahoo.com -jacob
|
99CCRT Dodge Dakota JOIN HERE
5/20/2003 23:13:39
| RE: Racing Seats IP: Logged
Message: Jeff, I found these seats on ebay. My main 2 questions are 1) I have a 38" waste and I am a large guy, how do these seats fit? 2)HOw are these for an install. Do you need custom brackets, sliders, etc.? Thanks, Jacob
|
DakotaJeff Dodge Dakota JOIN HERE
5/21/2003 15:50:51
| RE: Racing Seats IP: Logged
Message: Well jacob...imma pretty big guy myself..6ft 1 240.i fit fine into them..they are a lil firm..but very supportive..my buddy got a couple pieces of steel from his work to make the cross braces..the seat holes were closer together than the factory.....hope this helps some
Jeff
www.DangerousObsessions.com
South Jersey Car and Truck Club
|
99CCRT Dodge Dakota JOIN HERE
5/22/2003 00:06:17
| RE: Racing Seats IP: Logged
Message: Jeff,
Thanks for the response. Just bought the seats. I don't know of anyone around here that makes cross braces. I have a 1999 Dakota R/T. Not sure if it is the same fitting as yours. But if you friend does side stuff see if he would make them for me and how much he would do it for. Let me know either way. Got the seats now just have to get them in :) Thanks, vball005@yahoo.com
|
Matt Dodge Dakota JOIN HERE
5/23/2003 09:45:49
| RE: Racing Seats IP: Logged
Message: IntenseDak39~~ can you send me some pics of how those seats look in your truck? Thanx.
~~Matt
~~RTman70@hotmail.com
|
IntenseDak39 *GenIII*
5/24/2003 20:08:51
| RE: Racing Seats IP: Logged
Message: Matt,
i've got some pix but you cant see the whole seat in it... gimme a few days and i'll get you some better ones
1998 Regular Cab V6 Auto
|
| P 1 |
|
Post a reply to this message:
Username Registration: Optional All visitors are allowed to post messages
|