| From | Message |
cory
Dodge Dakota
JOIN HERE
5/05/2003
18:30:58
|
 Subject: Where to get lowering kit
IP: Logged
Message:
where can i get a 2/4 or 4/6 inch drop kit? i have a 1996 3.9L v6. link me please ;)
|
cory
Dodge Dakota
JOIN HERE
5/06/2003
22:01:55
|  RE: Where to get lowering kit
IP: Logged
Message:
hurry, i need it by this weekend
|
quickracing
GenII
5/07/2003
18:07:52
|  RE: Where to get lowering kit
IP: Logged
Message:
Order the Belltech kit...
Spindles in the front, Shackles and Hangers in the rear.
I used this kit for my 2/4 drop and I am extremly happy with the look as well as the ride!
Just type in "Belltech Lowering kits" in a search and you'll have plenty of sites to scan over!
Drew
|
cory
Dodge Dakota
JOIN HERE
5/07/2003
18:38:04
| RE: Where to get lowering kit
IP: Logged
Message:
is that your truck in your avatar?
|
quickracing
GenII
5/07/2003
19:04:09
| RE: Where to get lowering kit
IP: Logged
Message:
Sure is! Doesn't look like that at the present time.. I've got most the front clip taken apart for my engine swap and upgrades to the exterior.
If you're in the market for FACTORY 15" wheels, the lower valance W/fogs, Chrome bumper, 17" tires, etc, etc... Let me know!
I'm going to be selling these items to make money and room for my new customizing ideas! If your interested in anything let me know.
Also .. If you can shoot me a picture of your truck, I'd like to see it!
See ya
Drew
|
cory
Dodge Dakota
JOIN HERE
5/07/2003
21:53:01
| RE: Where to get lowering kit
IP: Logged
Message:
ooo nice truck. ill get a pic of mine, what is your email? and where in minnesota do you live? BTW, most drop kits ive been looking at are for 97-up, and mine is a 96. is there really that much differece besides body style?
|
quickracing
GenII
5/08/2003
10:30:53
| RE: Where to get lowering kit
IP: Logged
Message:
I live just south of Rochester, MN
I had a hard time as well tracking down a kit for my Dakota, But like I said, Belltech has it!
As for the difference 96 to 97? I'm not sure what the changes were, but I do know that the GenIII's are wider.
Drew
|
cory
Dodge Dakota
JOIN HERE
5/08/2003
21:25:20
| RE: Where to get lowering kit
IP: Logged
Message:
ARRGG all i can find are 97-up kits! btw, what difference is there between running a glasspack or flowmaster 40 series muffler?
|
Ross
Dodge Dakota
JOIN HERE
12/23/2003
16:54:52
|  RE: Where to get lowering kit
IP: Logged
Message:
I have a gen2 and am debating... 2/3 or 2/4???? i want a nice clean leveled out look and a little lower than stock. I am looking at the belltech kits for under 350$.... do they ride the same as stock? i like how my truck rides now.
|
Quickracing
GenII
12/23/2003
17:04:54
| RE: Where to get lowering kit
IP: Logged
Message:
After lowering mine 2/4 it is exactly level... But I did remove the spare tire. You'd be suprised at how much weight is there!! It's been a while since I did mine so I'm not sure what you're looking at for cost... but I can tell you the ride will surly stiffen up! It won't ride bad, but it is stiffer.
Hope that helps
Drew
|
b1llyw
GenII
12/25/2003
09:56:51
| RE: Where to get lowering kit
IP: Logged
Message:
Get the Western Chassis kit from sporttruckdirect.com. It's adjustable in the rear 3/3.5/4 so you can get the drop right where you want it. I bought that kit for my Dakota (haven't installed it yet).
Bill White - KRC Performance
'95 CC 4x2, SLT - 408 is done, truck isn't
'03 Ram 1500 QC 4x4 Hemi Off-Road
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
