| From | Message |
K-Dak
Dodge Dakota
JOIN HERE
2/21/2003
13:33:39
|
 Subject: Interior question
IP: Logged
Message:
Does anyone know how to remove the handle on the passenger glove box and the window cranks? I am confused and don't want to break them. Anything will help.
|
IntenseDak39
*GenIII*
2/21/2003
13:39:25
|  RE: Interior question
IP: Logged
Message:
window crank,
there is a little metal clip that holds them on. Its brassy looking and goes over the crank. Just pop it out (with a small screwdriver or the like) and pull the knob off.
glove box handle,
unscrew it
Turbocharged V6
|
K-Dak
Dodge Dakota
JOIN HERE
2/21/2003
14:30:21
|  RE: Interior question
IP: Logged
Message:
IntenseDak39,
I got the glove box handle with no problem. But I am afraid to put to much force on the window cranks. I can see the copper clip, it is a "C" clip or somethin. Well Do I push down on it or somethin because it is hard to get the screwdriver down there.
Thanks.
|
IntenseDak39
*GenIII*
2/21/2003
15:16:07
| RE: Interior question
IP: Logged
Message:
it is like a c clip.. find the open end and use to small screw drivers to push it out... dont try to pull it off.. just push the clip off
Turbocharged V6
|
steve
Dodge Dakota
JOIN HERE
2/21/2003
15:43:57
| RE: Interior question
IP: Logged
Message:
run a rag in between the handle and the door...this will free the clip!
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
