Forums
Forum Tools
|
 |
01:02:26 - 12/20/2024
Custom Style
| From | Message |
KovzR6
Dodge Dakota
JOIN HERE
11/22/2002
17:32:58
|
 Subject: after-market front bumpers
IP: Logged
Message:
i am getting a 2003 R/T in the new year and want to put on a different front bumper.
are there any brands that replace the whole bumper.....instead of covering over top of it?
|
KovzR6
Dodge Dakota
JOIN HERE
11/23/2002
10:40:05
| RE: after-market front bumpers
IP: Logged
Message:
anybody??????
|
NJQCDak
GenIII
11/23/2002
17:15:09
| RE: after-market front bumpers
IP: Logged
Message:
KovzR6,
I haven't seen a whole entire bumper change. Most bumper covers either cover the stock plastic valence or replace the stock plastic valence. The latter would require removing the stock plastic valence and intalling the your aftermarket bumper cover on your steel bumper.
Personally, I'm going to get a Stillen bumper cover and installing over my stock plastic valence. This approach will make the Stillen more sturdy and less flexy as well as use the stock fog lights. If you get an entire bumper/valence change, you will need to rig up a bracket for your stock fog lamps.
'01 QC Sport, 3.9L V6, 5spd, 2wd, Volant Intake,
SS Gibson exhaust, MSD Wires, Accel Super Coil, NAPA Cap, Flometrics Billet 48mm TB , JBA Silver Ceramic Headers, Autolites 3923s, R/T front swaybar & Quickor rear swaybar, KYB Monomax shocks
|
KovzR6
Dodge Dakota
JOIN HERE
11/23/2002
18:21:25
| RE: after-market front bumpers
IP: Logged
Message:
im going to be getting an 03 R/T in the new year so it will have the stampede ground effects package. and i dont like the front bumper cover. so i want to switch it. but im going to need something that replaces it. because one that covers it will not work due to the gound effects....... do you know what im saying?
|
NJQCDak
GenIII
11/25/2002
09:13:04
| RE: after-market front bumpers
IP: Logged
Message:
I see what you mean. I just visited the dodge site. I think it looks pretty nice. I'm looking for that kind of look. The stillen looks similiar.
I was told that the sport steel bumper doesn't wrap fully around like a SLT by Chris Lambert. You can remove the stock bumper cover and put on most aftermarket bumper covers on the steel bumper. Or get a SLT bumper and install the bumper cover over that. You would have to make custom brackets for the stock fog lights or instll the aftermarket's fog lights. What cover were you looking at?
BTW the R/T looks sweet!!!!!!!
'01 QC Sport, 3.9L V6, 5spd, 2wd, Volant Intake,
SS Gibson exhaust, MSD Wires, Accel Super Coil, NAPA Cap, Flometrics Billet 48mm TB , JBA Silver Ceramic Headers, Autolites 3923s, R/T front swaybar & Quickor rear swaybar, KYB Monomax shocks
|
KovzR6
Dodge Dakota
JOIN HERE
11/25/2002
17:56:42
| RE: after-market front bumpers
IP: Logged
Message:
the black one looks really good. but its because its in the dark. look at this red one with the same package and you will change your mind.
http://www.daimlerchrysler.ca/CA/03/EN/DODGE/1,,CA-03-EN-DODGE-DAKOTA-EXTERIOR-DESIGN,.html
|
NJQCDak
GenIII
11/25/2002
21:56:45
| RE: after-market front bumpers
IP: Logged
Message:
Whoa! It looks alittle different. It does appears that the lower ground effect maybe added or attached on to the stock lower plastic valence. You just have to wait to see how the R/T valence is attached.
Sorry, when I asked which cover you were looking at, I was refering to the aftermarket ones. Chances are with any aftermarket bumper cover, any body shop could remove the stock cover and paint & mount the aftermarket cover for you. Good luck.
'01 QC Sport, 3.9L V6, 5spd, 2wd, Volant Intake,
SS Gibson exhaust, MSD Wires, Accel Super Coil, NAPA Cap, Flometrics Billet 48mm TB , JBA Silver Ceramic Headers, Autolites 3923s, R/T front swaybar & Quickor rear swaybar, KYB Monomax shocks
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
|
