| From | Message |
RACERDY
GenIII
 
9/06/2002
11:20:07
|
 Subject: Flame Red paint in a can
IP: Logged
Message:
Just wondering if anyone can help me out.Im not sure how many people may know this but does anyone have the p/n for duplicolor flame red paint for Dakota? Or any other brand. Thanks in advance for any help.
RACERDY
|
SinCity R/T
Dodge Dakota
JOIN HERE
9/06/2002
12:30:04
| RE: Flame Red paint in a can
IP: Logged
Message:
Why buy Duplicolor when you can get factory-matched spray paint from any Mopar parts counter?
Get the paint code from the sticker in your door jamb and take it to the parts counter... They sell 8oz spray cans for about $8 which is kinda expensive for spray paint (some dealers may offer discounts on this, I bought 2 cans for my truck and got them cheaper) but it's a spot-on match since you're getting it from the same source as your factory paint.
- Steve
http://www.dakota-durango.com
|
2THEXTRM
GenIII
9/06/2002
21:44:06
| RE: Flame Red paint in a can
IP: Logged
Message:
I agree with SinCity R/T, got my Mopar Flame Red Paint for $6(dealer discount), small can but matched perfect. I used a little over half a can to paint my wifes clear Lund Bug guard and you almost can't tell it is on the truck, it took about 6-7 heavy coats to cover without any light spots. I tried to get the same paint at a local auto body supply shop and Mopar colored paint is not cheap aftermarket either. One spray 8oz spray can will paint quite abit if you use a primer base coat and several clear overcoats.
Flowmaster cat back, Air Raid w/homemade TB connect, Poweraid TB Spacer, Splitfire Plugs
3 inch body and 1.5 Block Lift, 305 70-16 X-Terrains on AR Terons
|
Glen440
Dodge Dakota
JOIN HERE
9/09/2002
00:13:26
| RE: Flame Red paint in a can
IP: Logged
Message:
I'm pretty sure the paint code is PR4 for the flame red. I painted my 87 Ram that colour.
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
