Dodge Dakota ForumDodge Dakota PhotosDodgeDakota.net Membership
  Forums   Forum Tools
01:00:02 - 12/20/2024

Custom Style
FromMessage
eric
Dodge Dakota
JOIN HERE
 Email

8/14/2002
00:22:28

Subject: Oh $hit handles for a '99
IP: Logged

Message:
Has anyone put the Oh $hit handles off a 2000+ dak, on a '99. Will they mount properly? Because everytime I make quick right-hand turns my passengers end up on my side.



intense99dak
Dodge Dakota
JOIN HERE
 Email

8/14/2002
07:04:26

RE: Oh $hit handles for a '99
IP: Logged

Message:

I've added the passenger side grab handle on my '99 and it wasn't too hard to do. I used the handle/cover off a '99 4x4.

If you go to the parts counter you'll need to get a new A-pillar cover, handle and mounting bolts. It does not come as a kit so be sure to order all three things. You can not order the plastic hole covers so look for them in a junkyard.

As for mounting the handle to the A-pillar it gets a little tricky as there aren't any proper size mounting holes in the A-pillar metal. Go to the local hardware store (with a mounting bolt in hand) and get a couple brass wood inserts. These are threaded both on the outside and inside. I forget the outer diameter of the insert, but it's in the neighborhood of 3/8" or 1/2". Also grab some Liquid Steel while you're at the store.

Once you have everything you need, remove the stcok A-pillar cover. You'll notice a couple long slots in the metal where you'll be mounting the bolts/inserts. What I did was I threaded the bolts into the inserts a little (through the new cover and handle, held everything in approximate position and marked where the inserts needed to be. Then I took just the inserts and threaded them into the metal. I used a little plastic steel to hold them in place (they screw in tightly, but I didn't want them to keep turning when I screwed the bolts in). When the plastic steel had a chance to set up a little I reinstalled everything.

The handle is secure enough that I can pull on it with most of my weight and it doesn't move.

Chuck Robbins
'99 IB Dakota Sport

Visit my site at intense99dak.com






eric
Dodge Dakota
JOIN HERE
 Email

8/18/2002
05:05:20

RE: Oh $hit handles for a '99
IP: Logged

Message:
Thanks so much.



   P 1


Post a reply to this message:

Username Registration: Optional
All visitors are allowed to post messages


Name:
Email:
Notify me when I get a reply to my message:Yes  No

Icons:            

          

Subject:
Message:
 



Home | Forums | Members | Pictures | Contact Us

This site is in no way affiliated with Chrysler or any of its subsidiaries.