| From | Message |
john
Dodge Dakota
6/04/2001
19:58:20
|
 Subject: daytona seats
IP: Logged
Message:
Does anyone happen to know what year daytona seats fit in a gen II dakota
|
kdogg
Dodge Dakota
6/05/2001
16:19:27
| RE: daytona seats
IP: Logged
Message:
I am not sure, but this weekend i put 97 grand
prix leather buckets in my 93. Wasnt that hard
and they look real go
|
chris
Dodge Dakota
JOIN HERE
2/01/2003
13:48:29
| RE: daytona seats
IP: Logged
Message:
yes they do fit. i have put 86 daytona seats in my 93 dodge dakota.
93. sb. v6. 50 series flowmaster. 5speed.
|
blue93v6
Dodge Dakota
JOIN HERE
2/01/2003
20:32:54
| RE: daytona seats
IP: Logged
Message:
chris and kdogg do either of u have pics of these seats in ur truck? i have a 93 x-cab and would like to see how they look if u guys have any pics
thanks
[]D*[]-[]*[]*[]_
|
Joe E.
Dodge Dakota
JOIN HERE
2/01/2003
22:28:58
| RE: daytona seats
IP: Logged
Message:
Hi guys. I m very intrested in this too. Are there any seats that fit easily into our GenI 1990 dakota? I really want a bucket seat that kinda holds you in it. Any picts avaliable please send to joelliott82@hotmail.com
Joe E
|
john
GenII
2/03/2003
20:42:00
| RE: daytona seats
IP: Logged
Message:
I finally found some buckets out of a 86 daytona. They fit perfectly, right color also.
92 CC 4x4 318
|
blue93v6
Dodge Dakota
JOIN HERE
2/03/2003
22:56:44
| RE: daytona seats
IP: Logged
Message:
john do u have any pictures so we can all se how they fit
|
Cory
Dodge Dakota
JOIN HERE
2/03/2003
23:32:09
|  RE: daytona seats
IP: Logged
Message:
this is kinda silly guys but I just have a straight bench seat its not a 40/60 or anything do you guys know if I would have to drill holes for these seats and get brackets for them? thanks for the help
|
blue93v6
Dodge Dakota
JOIN HERE
2/03/2003
23:37:28
| RE: daytona seats
IP: Logged
Message:
o ya never thought to ask did u guys have stock buckets already? i got a 60/40 seat and would like to put to buckets if not to many mods have to be done to put them in
thanks
|
Big O
GenII
6/18/2003
16:15:33
| RE: daytona seats
IP: Logged
Message:
I just picked up some daytona seats for my 93CC. Not sure what year. They are prety dirty but the look in pretty good shape. Only prob is that they are dark gray and I have the dard red interior. Oh well, just am excuse to get them recovered. Hopefully i'll get to put em in today or tomorrow.
Everyone with an 88-96 dak needs to get in on the custom
gauge group buy. We only need 13 more. www.speedhut.com
|
Joe E.
Dodge Dakota
JOIN HERE
6/18/2003
19:14:35
| RE: daytona seats
IP: Logged
Message:
Man you gotta post it up on sounddomain or something as soon as you get them in. I cant wait to see it and have someone tell me how thwy install. Later.
Joe E.
|
Big O
GenII
6/18/2003
22:54:19
| RE: daytona seats
IP: Logged
Message:
Install was soo easy. Just took the rails off the dak seats put em on the daytona seats, and put em back in. That was it. I'll get some pics soon.
Everyone with an 88-96 dak needs to get in on the custom
gauge group buy. We only need 13 more. www.speedhut.com
|
Joe E.
Dodge Dakota
JOIN HERE
6/19/2003
11:31:07
| RE: daytona seats
IP: Logged
Message:
everything bolted right up? damn. I might have to look into it.
Joe E.
|
john
GenII
6/19/2003
18:15:07
| RE: daytona seats
IP: Logged
Message:
Just like Big O said they were a very easy install. I have a pic of them on my site.
92 CC 4x4 318 http://www.cardomain.com/id/opus30,
http://www.dodgetruckworld.com/mygallery.asp?id=4234
|
Joe E.
Dodge Dakota
JOIN HERE
6/19/2003
21:46:50
| RE: daytona seats
IP: Logged
Message:
thanks for all the info but I still have 1 question. I have the 40/60 slipt bench. The passenger seat brackets will bolt up easily but what about the drivers side? Arent the rails farther apart cuz its the 60% side.Please correct me. Thx.
Joe E.
And are there any seat covers that look good out there to reapolster these guys with?
|
Big O
GenII
6/21/2003
15:10:33
| RE: daytona seats
IP: Logged
Message:
I had the same seats. Both rails are the same, there are no rails under the center part of the seat.
Everyone with an 88-96 dak needs to get in on the custom
gauge group buy. We only need 13 more. www.speedhut.com
|
Joe E.
Dodge Dakota
JOIN HERE
6/21/2003
15:26:50
| RE: daytona seats
IP: Logged
Message:
ok, i thougt about that. what supports that center section? I have wanted to remove it without loosing the whole seat. any help? thx
Joe E.
|
Big O
GenII
6/23/2003
16:13:00
| RE: daytona seats
IP: Logged
Message:
At least on mine the center section is attached to the drivers seat and there is no support under it.
Everyone with an 88-96 dak needs to get in on the custom
gauge group buy. We only need 13 more. www.speedhut.com
|
93bluev6
Dodge Dakota
JOIN HERE
6/23/2003
17:40:33
| RE: daytona seats
IP: Logged
Message:
ya mine is liek big O said. just look under your seat from the front and if you want measure between rails on each seat they should be the same.
|
Joe E.
Dodge Dakota
JOIN HERE
6/23/2003
17:57:45
| RE: daytona seats
IP: Logged
Message:
So would it be possible to unhook the center section from the drivers seat without hurting the seat? Id love to have a center console but my slip seats are in excellent condition. What do you think? Is a 40% removed 20% then another 40% seat possible? Thanks
Joe E.
|
93bluev6
Dodge Dakota
JOIN HERE
6/23/2003
18:02:02
| RE: daytona seats
IP: Logged
Message:
no i don't thick so. you would have to cut through the fabric and cut it right out. unless you were going to have it redone or had seat covers. my seats are in great condition too but i'm gonna swap em out for buckets. also if your lucky you can sell you seats and that will pay or help pay for new ones.
|
Joe E.
Dodge Dakota
JOIN HERE
6/23/2003
19:34:55
| RE: daytona seats
IP: Logged
Message:
So the 60% part of the seat is one frame? I was hoping that maybe the 40% part had a simple extension bolted on for the 20% part. I was gonna remove it and wrap the excess fabric under the seat and tie it down some how. Thanks for the help. Later
Joe E.
|
93bluev6
Dodge Dakota
JOIN HERE
6/23/2003
19:57:00
| RE: daytona seats
IP: Logged
Message:
well i think its one frame but if you got some spare time take the seat out and have a look, i doubt it would be that simple but its worth a try. but either way its gonna need some good fabric work to make it look original like the other seat.
|
| | P 1 Next Page>> |
