| From | Message |
dbbaker
Dodge Dakota
JOIN HERE
5/19/2002
14:20:49
|
 Subject: windshield banner installation help!!
IP: Logged
Message:
Is there an easy/ or prefered way to install a windshield banner? This will be the first one i've installed myself. We used to have a shop that made and installed them, now they only make them. seems like I remember them spraying it down with something to make it easier to install. Then using a small rubber blade to smooth the letters down and remove the air. Any help would be much appreciated.
|
DataKnight
Dodge Dakota
JOIN HERE
5/19/2002
14:41:56
|  RE: windshield banner installation help!!
IP: Logged
Message:
Basically they were just using soapy water.
The soapy water helps to move the decal around
so you can get it just right.
Add some dishwashing liquid into a spray bottle
with some water and spray the area lightly.
Then apply the decal, get it centered, then squeege out the air bubbles and water. Let it set for a few minutes to let it adhere to the surface before
you remove the premask. Decals are easy, I've done dozens. Hope this helps
DataKnight
|
dbbaker
Dodge Dakota
JOIN HERE
5/20/2002
18:16:32
| RE: windshield banner installation help!!
IP: Logged
Message:
thanks went right on.
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
