| From | Message |
Ryan Miller
Dodge Dakota
JOIN HERE
5/07/2002
12:25:25
|
 Subject: Lowering my Dakota (HELP)
IP: Logged
Message:
Ok here is my ? I want to lower my truck I have been looking for 1" springs and can not find them eibach makes a 1.5 (Try ordering that it never comes through) I put my truck up for people to see and every one says LOWER it more Well I have 2"in the back but I need to level it out. PLEASE help me Tell me what 2 do.
www.angelfire.com/tx5/dakota
|
Jeff W
Dodge Dakota
JOIN HERE
5/07/2002
14:59:01
| RE: Lowering my Dakota (HELP)
IP: Logged
Message:
R/T coils will lower the front 1". There are several posts with people selling R/T susp & check ebay or dealer.
|
kevster
Dodge Dakota
JOIN HERE
5/07/2002
22:01:08
| RE: Lowering my Dakota (HELP)
IP: Logged
Message:
Bell Tech sells the 1 INCH DROP FRONT COILS.
|
D
Dodge Dakota
JOIN HERE
5/08/2002
13:59:53
| RE: Lowering my Dakota (HELP)
IP: Logged
Message:
hotchkis coils are the best for the dak
www.hotchkisperformance.com
DJM and western chassis make coils also.
|
kota on 20s
GenIII
5/08/2002
14:25:12
| RE: Lowering my Dakota (HELP)
IP: Logged
Message:
there is no best coil. if you want a stiffer ride, hotchkis is the best for that.
if you want a stock ride, djm or western is the best for that.
i agree with going with the R/T spring if you only want a 1" drop.
why not a 3/5 or a 4/6 drop? if you are going to lower it...LOWER IT...lol
Eric, 98 5.2 5speed, K&N gen II, 50mm TB, 2bbl M-1, 1.7RR's, JBA ciramic headers, carsound cat, dumped gibson, and a lot more
|
Ryan Miller
Dodge Dakota
JOIN HERE
5/08/2002
14:42:50
| RE: Lowering my Dakota (HELP)
IP: Logged
Message:
I just want a better stance Ive already bought some 1" R/T springs and I think Im going to go w/ that I hope my truck will handel better (handles like crap now I think. I think I will also go w/ a sway bar on the back when I get the cash:( Thanks for all yor replies
|
Wes K
Dodge Dakota
JOIN HERE
5/09/2002
00:43:37
|  RE: Lowering my Dakota (HELP)
IP: Logged
Message:
If your gonna drop your truck. then DROP IT. Get a kit that you think might be a little too low. You wont be upset. I made the mistake i got the 4/6 and i still say it looks like the height of a stock s10 who wants that crap. Lower the better
www.oamweb.com/hobbies/smokindakota
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
