| From | Message |
youngin
Dodge Dakota
JOIN HERE
5/05/2002
01:08:55
|
 Subject: How to Remove a decal on my windsheild?
IP: Logged
Message:
How can I take a vinyl decal off my windshield?
Aaron
|
kota on 20s
GenIII
5/05/2002
01:30:50
| RE: How to Remove a decal on my windsheild?
IP: Logged
Message:
put hot water on it, and try to peel it off. if that dosent work, try a razor blade.
Eric, 98 5.2 5speed, K&N gen II, 50mm TB, 2bbl M-1, 1.7RR's, JBA ciramic headers, carsound cat, dumped gibson, and a lot more
|
dbbaker
Dodge Dakota
JOIN HERE
5/05/2002
11:02:02
| RE: How to Remove a decal on my windsheild?
IP: Logged
Message:
I just removed mine with a flat blade razor scrapper like you clean paint off windows of a house after you paint and get a little wild...it comes right off
|
Knobbyman
*GenIII*
5/05/2002
13:01:54
| RE: How to Remove a decal on my windsheild?
IP: Logged
Message:
Razor blade gets my vote.
'01 Graphite QC 4x4
4.7 3.55 LSD
http://www.knobbyman.com
----Speed only breaks stuff faster----
|
Nate
Dodge Dakota
JOIN HERE
5/05/2002
13:23:48
| RE: How to Remove a decal on my windsheild?
IP: Logged
Message:
A hairdryer also works well. Heat it up real good and it should peel off. You can use the razor blade to get any that is left over. I use this technique to get backgrounds off my motorcycle, it is practically the only thing that works for bikes.
|
Knobbyman
*GenIII*
5/05/2002
13:57:40
| RE: How to Remove a decal on my windsheild?
IP: Logged
Message:
LoL I forgot.. I live in Texas.. the sun on the windshield is about the same as a hairdryer. I just use the Razor Blade to get the corners up. Also on designs it helps with the curves and edges.
'01 Graphite QC 4x4
4.7 3.55 LSD
http://www.knobbyman.com
----Speed only breaks stuff faster----
|
canadiandak
Dodge Dakota
JOIN HERE
5/05/2002
16:29:19
| RE: How to Remove a decal on my windsheild?
IP: Logged
Message:
Power washer. Hold it at an angle of 5 degree with the horizontal and blast under the decals. This is how I got the stupied dealership decals of my back window.
|
Geoff
GenIII
5/05/2002
17:19:26
| RE: How to Remove a decal on my windsheild?
IP: Logged
Message:
Yeah try the powerwasher
Geoff
2000 3.9L RC Sport. Flame Red. 5-speed, 3.55, Airaid, Vortex Muffler, F&B 48mm TB, 180 T-Stat, Autolite 3923s, IAT Adjuster, Clear Corners, SS Grill Insert, JBA Plug Wires, Underdrive Crank Pulley. Hurst Shifter, Removed Clutch Fan, Sony CDX-MP450X MP3, Infinity Reference Speakers
|
SMITTY
Dodge Dakota
JOIN HERE
2/03/2010
16:35:01
| RE: How to Remove a decal on my windsheild?
IP: Logged
Message:
I JUST BOUGHT A USED H.D. FATBOY..REALLY PRETTY WITH A NEW LOOKING WINDSHEILD (I ASSUME IT IS PLEXIGLASS)...IT HAS 2 POLICE DECALS IN THE LOWER CORNER....IS THERE ANY WAY TO REMOVE THEM WITHOUT SCRATCHING THE WINDSHEILD.....I THINK A RASOR BLADE WILL SCRATCH THE PLEXIGLASS..PLEASE HELP.....SMITTY
|
eric
Dodge Dakota
JOIN HERE
2/03/2010
22:17:15
| RE: How to Remove a decal on my windsheild?
IP: Logged
Message:
i just took one off razor blade and for glue i used tint off from walmart it takes glue 100% off
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
