| From | Message |
Big O
Dodge Dakota
JOIN HERE
4/21/2002
21:40:28
|
 Subject: Gen II rollpan
IP: Logged
Message:
Anyone have pictures of different rollpans for gen 2 daks. I like the lund style, but I'd really like to get a steel rollpan instead of fiberglass or plastic. Any pictures or info is appreciated.
|
1FLAMED92DAK
Dodge Dakota
JOIN HERE
4/22/2002
01:26:36
| RE: Gen II rollpan
IP: Logged
Message:
I bought a Steel One from AIM i know im gonna get Flack from this one but it was a good deal Just takes them forever to ship plus it needed some work in areas I had My Body Shop fill in the Licences Plate light and I bought a Billet License plate frame with a Light in it. Plus Make sure your trucks is really Straight come to find out that my tailgate was bowed so much that i had to drop the Rollpan down a little bit so it doesnt make for a flush fit like i wanted but it is liveable,As for wiring the light it was simple just remove the harness from the passenger side that connects to the lights on the bumper and cut one wire down to the end the connector, then splice the wire to the one supplied by licence plate light and the other is a ground real simple use a butt connector in back of the rollpan and i didnt even have to make another whole in the PAN just routed wires between the pan a the license plate
|
Big O
Dodge Dakota
JOIN HERE
4/22/2002
01:55:48
| RE: Gen II rollpan
IP: Logged
Message:
do you have any pics?
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
