| From | Message |
Matt Weaver
Dodge Dakota
JOIN HERE
4/11/2002
00:00:58
|
 Subject: where can i get parts for my dakota?
IP: Logged
Message:
hey,
I am looking for some parts for my 95 extended cab regular bed dakota. it has the v6 in it. I am really trying to find a 3" or 4" lowering kit. what would be even better would be to get 3" or 4" lowering springs for up frond and then 3" or 4" block kit for the rear. I would also like to find a roll pan, air dam, and gournd effects. i would like to find these places on the net so please help me find some sites. you guys seem to know and love your dakotas so im sure you can help.
thanks,
matt
|
1FLAMED92DAK
Dodge Dakota
JOIN HERE
4/11/2002
01:43:20
| RE: where can i get parts for my dakota?
IP: Logged
Message:
BELLTECH makes the 2 drop spindles for the front and the springs you can go with EIBACH that should give you 3" up front the rear Hangers are from BELLTECH also, Hopefully this helps you out good luck
|
QuickRacing
Dodge Dakota
JOIN HERE
4/11/2002
14:31:38
|  RE: where can i get parts for my dakota?
IP: Logged
Message:
My drop kit is from Belltech, 3/4 drop I believe.. As for the roll pan, air dam, and Ground Effects... Well you can find a roll pan anywhere.. but the air dam and ground effects,... well I assume you mean the front valance (under the bumper) I bought mine with one, try a dealer, "**I'm working on a customized grill and bumper for mine, so I may sell te one I have**) I'll let you know. And Ground Effects... GOOD LUCK.. I've been from one end of the web to the other, in and out of catologs.. everywhere. And I have found NOTHING for the Ext. cab GenII Dakotas. Unless you are looking for the running board type... I just used GTS's "Custom Molded Side Skirts" They are hard to find but it's the best I've found! If you need more information or have any more questions, e-mail me and I'll do my best to help you.
"QuickRacing"
|
Chris
Dodge Dakota
JOIN HERE
4/12/2002
18:57:55
| RE: where can i get parts for my dakota?
IP: Logged
Message:
Hey. You can get a 2/4 or 3/5 lowering kit from
sporttruckdirect.com. Stillen makes an air
dam for your truck, too. Go to stillen.com and
look for it. I hope this helps. Bye.
Chris
|
rtxpres
Dodge Dakota
JOIN HERE
4/12/2002
22:16:57
| RE: where can i get parts for my dakota?
IP: Logged
Message:
Matt,
For roll pan, air dam or hood for your '95, try AAR http://www.aarqualityfiberglass.com/
Also see http://www.dragtruk.com/ENTRIES/20KM1FD2KWBP.html
for a different pic of my truck with a different hood and the front bumper/air dam. I filled the fog light holes on mine for racing.
Ray
|
JOSH
Dodge Dakota
JOIN HERE
7/27/2004
23:19:51
| RE: where can i get parts for my dakota?
IP: Logged
Message:
I'VE GOT A 99 REG. CAB WITH A 4 BANGER AND I CANNOT FIND A LOWERING KIT FOR IT ANYWHERE PLEASE HELP IF U KNOW WHERE I CAN FIND ONE
|
QuickRacing
GenII
7/28/2004
21:00:18
| RE: where can i get parts for my dakota?
IP: Logged
Message:
http://www.belltechcorp.com/
Drew
|
DakYoda
Dodge Dakota
JOIN HERE
8/03/2004
21:39:28
| RE: where can i get parts for my dakota?
IP: Logged
Message:
this post should be in the lowered/slammed forum
|
Chris
Dodge Dakota
JOIN HERE
8/08/2004
19:39:08
| RE: where can i get parts for my dakota?
IP: Logged
Message:
hey Ray, where did you get that hood from? i have a 94. i like that truck.
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
