Forums
Forum Tools
|
 |
00:29:40 - 12/20/2024
Custom Style
| From | Message |
blaze
Dodge Dakota
JOIN HERE
3/30/2002
00:49:35
|
 Subject: about to lower...need input!!
IP: Logged
Message:
ok i am about to lower my truck. I dont want a "low rider", i just want it lowered a bit. I am thinking of a 2/3 or 2/4 drop.(cant rememebr which one is level for a dakota.) my question is which is the best brand to go with for the dakota and where should i look for one on the enet for a good price. And also would a 2/3 or 2/4 be level?...........thanks in advance for any help
|
kota on 20s
GenIII
 
3/30/2002
02:04:53
|  RE: about to lower...need input!!
IP: Logged
Message:
well i have a 4/6 drop on mine and the back still sits exactly 1" higher.
i have a westernchassis drop and i have had no problems with it
you can also try hotchkis, or DJM
Eric, 98 5.2 5speed, K&N gen II, 50mm TB, 2bbl M-1, 1.7RR's, JBA ciramic headers, carsound cat, dumped gibson, and a lot more
|
D
Dodge Dakota
JOIN HERE
3/30/2002
02:09:35
| RE: about to lower...need input!!
IP: Logged
Message:
2/4 should sit level, I didnt think mine sat level
with a 3/5 so I added an extra 1" block in the
rear. sits at 3-6 now, and level!
http://photos.yahoo.com/bc/p0intless/lst?.dir=/
(click on the dakota pics)
Hotchkis makes the best kit (performance
wise) if you want comfort and ride, go with
Western Chassis or DJM control arms and
shackle hangers.
|
Marks DQC
GenIII
3/30/2002
06:47:53
| RE: about to lower...need input!!
IP: Logged
Message:
You should measure your truck's starting point. Some trucks may measure different. From there you can plan your drop to get what you want. (Measure from the ground to the bottom of the fender well where the center of the wheel at all 4 points on level ground.)
Most likely the rear is about 3" higher than the front. Then to get it exactly level your drop has to correspond.
If you have the money go Hotchkis!
2001 Dakota Quad Cab SLT , 4.7L, Auto, 3.55 LSD, Garnet Red over Slate
Zaino, Tint, Vent Guard, Gaylords Lid, Hotchkis Springs, Bilstein Shocks, Wet Okole Covers, Painted Grill Shell with Ram inserts, S/S Bumper/Valence Cover, Billet Antenna, Precision Roll Pan, APC Clear Corners, Airaid Intake
|
blaze
Dodge Dakota
JOIN HERE
3/30/2002
14:31:39
|  RE: about to lower...need input!!
IP: Logged
Message:
thanks everyone for the info....i will look into each one u recommended and see which i can afford......again thanks
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
|
