| From | Message |
doch80
Dodge Dakota
11/22/2001
02:06:13
|
 Subject: Help!!! Quickly!!!Steering!!!
IP: Logged
Message:
How would one go about getting the inner tie rod end seperated from the relay rod???? And also, how does one go about seperating the relay rod form the pitman arm and the idler arm. I've tried to use a puller but it is not working!!!! Help me please...
Doch80
4x4 1999 dakota v-8
|
Hawkeye
*GenIII*
11/22/2001
08:59:31
|  RE: Help!!! Quickly!!!Steering!!!
IP: Logged
Message:
Ive never tried to do it so I cant help you there. Sorry. Just didnt want you to think that everyone was ignoring you.
'00 QC 4x4
4.7 3.55 LSD
33x12.50 Pro Comp X-T's
http://johnammons.tripod.com/home.html
|
2THEXTRM
Dodge Dakota
11/22/2001
09:48:19
| RE: Help!!! Quickly!!!Steering!!!
IP: Logged
Message:
I think it requires a special tool that you can rent at an AutoZone, Pepboys, etc. You do not want to use and "pickle fork" for seperating anything on the front end of our Daks, it tears the hell outta the rubber boots that hold grease making a mess and soon after the part will fail from lack of lubrication.
|
doch80
Dodge Dakota
11/22/2001
18:34:59
| RE: Help!!! Quickly!!!Steering!!!
IP: Logged
Message:
Thanks much! I didn't have the right tools last night when I tried, wrenchs I was using were to small. This morning before I woke up my dad found the right tool (pipe wrech) and took them apart for me. It's amazing when you have the right tools! 2 1/2 days of working and my lift is almost done. just need to tighten the bolts in the front end and put the torsion bars back on! Should be done by tomorrow afternoon. Hopefully!
Doch80
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
