Forums
Forum Tools
|
 |
00:43:26 - 12/20/2024
Raised / Lifted Dakotas
| From | Message |
MoparDude340
Dodge Dakota
JOIN HERE
11/05/2002
14:56:52
|
 Subject: 35's on '98 2WD????
IP: Logged
Message:
Next on my, who knows how long, list of mods on my '98 RC 2WD... I was thinking of going with the Performave Accessories 3" and the FabTech 3". I know that 33's would fit, since FabTech says that 32's will fit with just their 3". My question is, can I put 35's under my Dak with both of these kits. I already had planned on switching over to 4.56's too, so the Dak shouldn't have too much trouble trunning some 35" sneakers. :-) Thanks, if you help me.
Later,
'98 3.9 RC... A few mods... ;-)
'88 340 RC... I'll never tell... Okay, I might... ;-)
|
stealwings
GenIII
 
11/05/2002
15:38:45
|  RE: 35's on '98 2WD????
IP: Logged
Message:
No way. I tried it. It isn't going to happen without a lot of cutting. Even with my 33x12.5's I had to do some trimming. If you do make it work I want to see the pics. Greg
98 SLT Dak. 3 inch Fab tech suspension lift, 3 inch body, 33x12.5 BFG A/T KO tires, Eagle 589 wheels, 48 mm throttle body, ram air, JBA Headers, Flowmaster 3 inch exhaust, Ford/Bosch 19# fuel injectors, MSD coil, Bosch 4 prong plugs, Underdrive pulley and One day pictures.....
|
MoparDude340
Dodge Dakota
JOIN HERE
11/05/2002
15:47:06
|  RE: 35's on '98 2WD????
IP: Logged
Message:
Thanks Greg,
I was kinda afraid of that. Oh well. I just went out to one of my TSL/SX 35x15.50's that I have off of my CJ7, rolled it up next to the Dak, and I'm not sure if it would look right with just 6" of lift. I'd probably go with 12.50's instead of 15.50's anyways for clearance issues. How do those 33's look on your Dak. Do you know of someone with the lift you have and I want that has pics? RC's if you know of them. Thanks again.
Later,
'98 3.9 RC... A few mods... ;-)
'88 340 RC... I'll never tell... Okay, I might... ;-)
|
stealwings
GenIII
11/05/2002
15:56:49
| RE: 35's on '98 2WD????
IP: Logged
Message:
The 33x12.5's look great. These trucks really aren't made to go higher with the steering that Dodge put in them. I'd show you pics if this site would ever put them in my profile. I really don't know the difference between the SLT's and the RC's. Greg
98 SLT Dak. 3 inch Fab tech suspension lift, 3 inch body, 4.10 Limited slip posi rear end, 33x12.5 BFG A/T KO tires, Eagle 589 wheels, 48 mm throttle body, ram air, JBA Headers, Flowmaster 3 inch exhaust, Ford/Bosch 19# fuel injectors, Jet Stage II chip, MSD coil, Bosch 4 prong plugs, Underdrive pulley and One day pictures.....
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
|
