| From | Message |
shiftrider
Dodge Dakota
JOIN HERE
9/15/2002
15:06:11
|
 Subject: Body lift with manual?
IP: Logged
Message:
I know that some of you guys have done it. I was just wondering what problems did you have with the shifter. extend? bend? or whatever else you had to do...I have read a lot of the other post and they have been helpful but i havent reallly heard what exact problems you guys with a stick have had with the tranny if any, any imput would be greatly apperiated. I did read that someone couldnt get it out of 1st or something, but cant find that post again...thx
2000 CC SLT 3.9weak ya other stuff but too much typing
|
dkr8611
Dodge Dakota
JOIN HERE
9/16/2002
14:33:22
|  RE: Body lift with manual?
IP: Logged
Message:
I extended it 3 inches with a piece supplied by Perf Acc (did not come in the kit at the time).
Then bent it forward because it was still hitting the place plastic piece that holds the bottom of the shifter boot. This caused it to hit the dash if I shifted too hard into 1, 3, or 5. So later I bent it back some and trimmed .5 inch out of the bottom left corner of the plastic piece. Now it shifts like stock and I am happy.
Basically from what I have read, you will just have to play with it.
|
rcdrews
Dodge Dakota
JOIN HERE
9/16/2002
18:03:03
| RE: Body lift with manual?
IP: Logged
Message:
i just finished my pa lift yesterday and did not touch the 5 speed. the only problem that i have is that you cannot shift into reverse 2nd or 4th if there is a drink in the cup holder. i actually kind of like it shorter though gives a little bit of a sport feel to it.
2000 cc 3.9
|
shiftrider
Dodge Dakota
JOIN HERE
9/17/2002
00:56:11
| RE: Body lift with manual?
IP: Logged
Message:
Thanks for responded wasnt sure if i would get one being that it is probably a well worn out subject. Now i can get started but this and 33 instead of 31 means 4 inchs higher, damn i may have to ride in, im getting old and this jumping thing gets more difficult by the day(btw talking about loading my bike)
2000 SLT CC weak 3.9 KX500 equipped bed
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
