| From | Message |
Steve
Dodge Dakota
JOIN HERE
7/14/2002
01:52:07
|
 Subject: Designing a custom lift
IP: Logged
Message:
I am fixing to start working on design plans for a custom coil-over front suspension conversion for a 97-99 Dak. It's going to use a Dual-stage Racerunner set-up from Avalanche Engineering along with all the neccisary parts in order for the suspension to work correctly. It's going to be made to work ONLY with a 94-01 4x4 Ram solid front axle or any left-side differential axle. If anyone has any questions about the parts i'm using, the quality of the parts, or anything at all. Either post a reply or E-mail me at hemidakota97@aol.com. I'll periodically check in to let you know how it's coming.
Steve
|
YJ
Dodge Dakota
JOIN HERE
7/17/2002
20:45:30
|  RE: Designing a custom lift
IP: Logged
Message:
Could you go ahead and scrap that and make one for a 2000 or newer? ; )
Thanks,
YJ
Black 2K QC 4x4 4.7 3.92 KVT910DVD
Black 91 YJ 4LHO Borla | 5" Suspension | 33BFGMT
|
Steve
Dodge Dakota
JOIN HERE
7/18/2002
17:25:53
| RE: Designing a custom lift
IP: Logged
Message:
I could do that but that will come later. The problem with the Dakotas newer than '99 is that they use the rack-and-pinion steering, which involves a lot more designing and customization. Once the custom suspension for the '97-'99 Dak's is figured out and refined then i can start on the later models.
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
