| From | Message |
AcrophobiA
Dodge Dakota
10/31/2001
23:39:11
|
 Subject: 35 x 18's
IP: Logged
Message:
BFG makes them in the Mud Terrain TA and I want them! How much of a lift will I need?
|
Clevite 77
Dodge Dakota
11/06/2001
21:25:37
| RE: 35 x 18's
IP: Logged
Message:
lift hell,.. buy a ram
|
Knobbyman
GenIII
11/07/2001
08:03:44
| RE: 35 x 18's
IP: Logged
Message:
I think to run 35's you'd need a 5-6" suspension & a 3" body. But we really won't know until someone tries it... Please anyone correct me if I'm wrong.
'01 Graphite QC 4x4
4.7 3.55 LSD
http://www.knobbyman.com
|
Dakota
GenIII
11/07/2001
10:10:01
| RE: 35 x 18's
IP: Logged
Message:
A 3" Body and 3" Suspension will work. Its tight...but you can do it.
-Dakota
Http://dakota2.4mg.com
|
BRENT88
Dodge Dakota
11/12/2001
16:42:22
| RE: 35 x 18's
IP: Logged
Message:
Its called a sawzall... you dont need a lift!!!
|
aggie97
Dodge Dakota
11/22/2001
23:38:36
| RE: 35 x 18's
IP: Logged
Message:
Check out back issues of 4wheel and offroad. they had a 98 durango with the 5.5 lift and 3 inch body lift with 38's. Mentioned tire rub but had no power without gears. I don't know if you could get anything higher than 3.92's for the front axle assembly.
Good Luck
|
jLo
Dodge Dakota
11/24/2001
10:36:24
| RE: 35 x 18's
IP: Logged
Message:
that's the size tire i would like to get, so i'm definitely interested.... i'm looking into how hard it'll be to do a solid axle swap up front (anyone with ideas??) =) and after that i'll get the truck up higher, and slap the 35's on... right now i cranked the torsion bars and added 3" blocks in the back, and it's on 31's... not bad, but of course i want more!!! oh yeah, and it's a '94 sport 4x4 club cab, with the 5.2 V8, etc, blah, blah...
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
