| From | Message |
Jeff
Dodge Dakota
JOIN HERE
6/18/2002
20:15:51
|
 Subject: 2wd Body Lift Pics/??
IP: Logged
Message:
If any one has pics of the 3" body lift I would like to see them, TALLQUAD, your truck looks great. I was wondering though, do you have to weld on the extention for the Steering shaft? Also if man tranny, did you have to weld on shift knob extention? Any additional info would help, I am doing mine this weekend.
98 cc 2wd
|
bjlindsey
*GenIII*
6/18/2002
22:01:14
| RE: 2wd Body Lift Pics/??
IP: Logged
Message:
No weld on steering shaft....dunno on tranny..I have auto.
01 QC 4x4 5.9L 3.92 LSD
3" Body Lift, 305/70-R16 XTerrains,
K&N clone, Clear Corners, Carbon Fiber Tails,
www.FreeGasForYou.com
|
TallQuad
Dodge Dakota
JOIN HERE
6/19/2002
00:30:29
| RE: 2wd Body Lift Pics/??
IP: Logged
Message:
Ahh man... if you have a manual... it's gonna be a real pain in your a$$! I did a full write-up on what to do (at least what I did) and its floating around this forum somewhere if you do a search. Short and sweet, I used a torch to heat up the "S" part of the shifter and bent it close to an "I" shape.
As for the steering extension, bjlindsey is right, just slip it on!
|
Jeff
Dodge Dakota
JOIN HERE
6/19/2002
19:53:27
| RE: 2wd Body Lift Pics/??
IP: Logged
Message:
Cool,Thanks guys I appreciate your input. I dont know what kind of instructions you all got with your kits, mine is kind of dry, no pictures or anything, and I'm more of the hands on type. Again thanks for the info!
Jeff 98 cc 2wd
|
Chaximus
Dodge Dakota
JOIN HERE
6/24/2002
09:39:16
| RE: 2wd Body Lift Pics/??
IP: Logged
Message:
http://www.rit.edu/~cmh7456/4x2andfriends/Dakota/
Here are pix of my lift installation...i tried to take as many pix as i could, but got a little "hot" when it came to removing the lower fan shroud, which was a pain, and i forgot to take pix. Don't be fooled, i have a 3 inch fabtech lift too, it's not only the body lift. Hope the pix give ya an idea.
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
